Ton/KLP1
1
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

files on the USB stick as delivered by Kingroon for the KLP1

Browse Source
This commit is contained in:
Ton 2024-08-25 11:07:29 +02:00
parent 3b70d3ab26
commit 2ca02a7d65
12 changed files with 481247 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

480158
files/USBSTICK/KLP1-快速引导指南卡Quick Guide Card.pdf Normal file
View File

File diff suppressed because one or more lines are too long

BIN
files/USBSTICK/KLP1说明书instructions.pdf Normal file
View File

Binary file not shown.

231
files/USBSTICK/OrcaSlicer/0.20mm Standard @ KLP1.json Normal file
View File

@ -0,0 +1,231 @@
{
"accel_to_decel_enable": "0",
"accel_to_decel_factor": "50%",
"bottom_shell_layers": "2",
"bottom_shell_thickness": "0",
"bottom_solid_infill_flow_ratio": "1",
"bottom_surface_pattern": "monotonic",
"bridge_acceleration": "50%",
"bridge_angle": "0",
"bridge_density": "100%",
"bridge_flow": "0.95",
"bridge_no_support": "0",
"bridge_speed": "50",
"brim_ears_detection_length": "1",
"brim_ears_max_angle": "125",
"brim_object_gap": "0.05",
"brim_type": "no_brim",
"brim_width": "5",
"compatible_printers": [
"MyKlipper 0.4 nozzle"
],
"compatible_printers_condition": "",
"default_acceleration": "10000",
"default_jerk": "0",
"detect_narrow_internal_solid_infill": "1",
"detect_overhang_wall": "1",
"detect_thin_wall": "0",
"draft_shield": "disabled",
"elefant_foot_compensation": "0.15",
"enable_arc_fitting": "0",
"enable_overhang_speed": "1",
"enable_prime_tower": "0",
"enable_support": "0",
"enforce_support_layers": "0",
"ensure_vertical_shell_thickness": "1",
"exclude_object": "1",
"extra_perimeters_on_overhangs": "0",
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
"filter_out_gap_fill": "0",
"flush_into_infill": "0",
"flush_into_objects": "0",
"flush_into_support": "1",
"from": "",
"fuzzy_skin": "none",
"fuzzy_skin_point_distance": "0.8",
"fuzzy_skin_thickness": "0.3",
"gap_infill_speed": "200",
"gcode_add_line_number": "0",
"gcode_comments": "0",
"gcode_label_objects": "1",
"independent_support_layer_height": "1",
"infill_anchor": "400%",
"infill_anchor_max": "20",
"infill_combination": "0",
"infill_direction": "45",
"infill_jerk": "9",
"infill_wall_overlap": "8%",
"inherits": "0.20mm Standard @MyKlipper",
"initial_layer_acceleration": "500",
"initial_layer_infill_speed": "105",
"initial_layer_jerk": "9",
"initial_layer_line_width": "0.5",
"initial_layer_min_bead_width": "85%",
"initial_layer_print_height": "0.2",
"initial_layer_speed": "50",
"initial_layer_travel_speed": "100%",
"inner_wall_acceleration": "4000",
"inner_wall_jerk": "1",
"inner_wall_line_width": "0.45",
"inner_wall_speed": "180",
"interface_shells": "0",
"internal_bridge_speed": "150%",
"internal_bridge_support_thickness": "0",
"internal_solid_infill_acceleration": "3000",
"internal_solid_infill_line_width": "0.42",
"internal_solid_infill_pattern": "monotonic",
"internal_solid_infill_speed": "180",
"ironing_flow": "10%",
"ironing_pattern": "zig-zag",
"ironing_spacing": "0.15",
"ironing_speed": "30",
"ironing_type": "no ironing",
"layer_height": "0.2",
"line_width": "0.42",
"make_overhang_printable": "0",
"make_overhang_printable_angle": "55",
"make_overhang_printable_hole_size": "0",
"max_bridge_length": "10",
"max_travel_detour_distance": "0",
"min_bead_width": "85%",
"min_feature_size": "25%",
"min_width_top_surface": "300%",
"minimum_sparse_infill_area": "15",
"name": "0.20mm Standard @ KLP1",
"notes": "",
"only_one_wall_first_layer": "0",
"only_one_wall_top": "1",
"ooze_prevention": "0",
"outer_wall_acceleration": "3000",
"outer_wall_jerk": "1",
"outer_wall_line_width": "0.42",
"outer_wall_speed": "150",
"overhang_1_4_speed": "0",
"overhang_2_4_speed": "30",
"overhang_3_4_speed": "20",
"overhang_4_4_speed": "10",
"overhang_speed_classic": "0",
"post_process": [],
"precise_outer_wall": "0",
"prime_tower_brim_width": "3",
"prime_tower_width": "60",
"prime_volume": "45",
"print_flow_ratio": "1",
"print_sequence": "by layer",
"print_settings_id": "0.20mm Standard @ KLP1",
"raft_contact_distance": "0.1",
"raft_expansion": "1.5",
"raft_first_layer_density": "90%",
"raft_first_layer_expansion": "2",
"raft_layers": "0",
"reduce_crossing_wall": "0",
"reduce_infill_retraction": "1",
"resolution": "0.012",
"role_based_wipe_speed": "1",
"seam_gap": "0.1",
"seam_position": "aligned",
"single_extruder_multi_material_priming": "1",
"skirt_distance": "2",
"skirt_height": "1",
"skirt_loops": "0",
"skirt_speed": "0",
"slice_closing_radius": "0.049",
"slicing_mode": "regular",
"slow_down_layers": "2",
"small_perimeter_speed": "50%",
"small_perimeter_threshold": "0",
"solid_infill_filament": "1",
"sparse_infill_acceleration": "4000",
"sparse_infill_density": "15%",
"sparse_infill_filament": "1",
"sparse_infill_line_width": "0.45",
"sparse_infill_pattern": "gyroid",
"sparse_infill_speed": "300",
"spiral_mode": "0",
"staggered_inner_seams": "0",
"standby_temperature_delta": "-5",
"support_angle": "0",
"support_base_pattern": "rectilinear",
"support_base_pattern_spacing": "2.5",
"support_bottom_interface_spacing": "0.5",
"support_bottom_z_distance": "0.2",
"support_critical_regions_only": "0",
"support_expansion": "0",
"support_filament": "0",
"support_interface_bottom_layers": "2",
"support_interface_filament": "0",
"support_interface_loop_pattern": "0",
"support_interface_pattern": "rectilinear",
"support_interface_spacing": "0.5",
"support_interface_speed": "80",
"support_interface_top_layers": "2",
"support_line_width": "0.42",
"support_object_xy_distance": "0.35",
"support_on_build_plate_only": "0",
"support_remove_small_overhang": "1",
"support_speed": "150",
"support_style": "default",
"support_threshold_angle": "30",
"support_top_z_distance": "0.2",
"support_type": "normal(auto)",
"thick_bridges": "0",
"timelapse_type": "0",
"top_shell_layers": "3",
"top_shell_thickness": "0",
"top_solid_infill_flow_ratio": "1",
"top_surface_acceleration": "6000",
"top_surface_jerk": "9",
"top_surface_line_width": "0.42",
"top_surface_pattern": "monotonic",
"top_surface_speed": "200",
"travel_acceleration": "10000",
"travel_jerk": "12",
"travel_speed": "300",
"travel_speed_z": "0",
"tree_support_adaptive_layer_height": "1",
"tree_support_angle_slow": "25",
"tree_support_auto_brim": "1",
"tree_support_branch_angle": "45",
"tree_support_branch_angle_organic": "40",
"tree_support_branch_diameter": "5",
"tree_support_branch_diameter_angle": "5",
"tree_support_branch_diameter_double_wall": "3",
"tree_support_branch_diameter_organic": "2",
"tree_support_branch_distance": "5",
"tree_support_branch_distance_organic": "1",
"tree_support_brim_width": "3",
"tree_support_tip_diameter": "0.8",
"tree_support_top_rate": "30%",
"tree_support_wall_count": "0",
"version": "1.6.0.0",
"wall_distribution_count": "1",
"wall_filament": "1",
"wall_generator": "arachne",
"wall_infill_order": "inner wall/outer wall/infill",
"wall_loops": "2",
"wall_transition_angle": "25",
"wall_transition_filter_deviation": "25%",
"wall_transition_length": "100%",
"wipe_on_loops": "1",
"wipe_speed": "80%",
"wipe_tower_bridging": "10",
"wipe_tower_cone_angle": "0",
"wipe_tower_extra_spacing": "100%",
"wipe_tower_extruder": "0",
"wipe_tower_no_sparse_layers": "0",
"wipe_tower_rotation_angle": "0",
"wiping_volumes_extruders": [
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70",
"70"
],
"xy_contour_compensation": "0",
"xy_hole_compensation": "0.1"
}

241
files/USBSTICK/OrcaSlicer/KINGROON PLA - KLP1.json Normal file
View File

@ -0,0 +1,241 @@
{
"additional_cooling_fan_speed": [
"70"
],
"bed_temperature_difference": [
"10"
],
"chamber_temperature": [
"0"
],
"close_fan_the_first_x_layers": [
"2"
],
"compatible_printers": [
"MyKlipper 0.4 nozzle",
"MyMarlin 0.4 nozzle"
],
"compatible_printers_condition": "",
"compatible_prints": [],
"compatible_prints_condition": "",
"cool_plate_temp": [
"60"
],
"cool_plate_temp_initial_layer": [
"60"
],
"default_filament_colour": [
""
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"0"
],
"eng_plate_temp": [
"60"
],
"eng_plate_temp_initial_layer": [
"60"
],
"fan_cooling_layer_time": [
"100"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"filament_cooling_final_speed": [
"3.4"
],
"filament_cooling_initial_speed": [
"2.2"
],
"filament_cooling_moves": [
"4"
],
"filament_cost": [
"50"
],
"filament_density": [
"1.24"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"filament_flow_ratio": [
"0.98"
],
"filament_is_support": [
"0"
],
"filament_load_time": [
"0"
],
"filament_loading_speed": [
"28"
],
"filament_loading_speed_start": [
"3"
],
"filament_max_volumetric_speed": [
"25"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_multitool_ramming": [
"0"
],
"filament_multitool_ramming_flow": [
"10"
],
"filament_multitool_ramming_volume": [
"10"
],
"filament_notes": [
""
],
"filament_ramming_parameters": [
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_lift_above": [
"nil"
],
"filament_retract_lift_below": [
"nil"
],
"filament_retract_lift_enforce": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_settings_id": [
"KINGROON PLA - KLP1"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n"
],
"filament_toolchange_delay": [
"0"
],
"filament_type": [
"PLA"
],
"filament_unload_time": [
"0"
],
"filament_unloading_speed": [
"90"
],
"filament_unloading_speed_start": [
"100"
],
"filament_vendor": [
"Generic"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"from": "",
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"60"
],
"hot_plate_temp_initial_layer": [
"60"
],
"inherits": "My Generic PLA",
"name": "KINGROON PLA - KLP1",
"nozzle_temperature": [
"210"
],
"nozzle_temperature_initial_layer": [
"210"
],
"nozzle_temperature_range_high": [
"230"
],
"nozzle_temperature_range_low": [
"190"
],
"overhang_fan_speed": [
"100"
],
"overhang_fan_threshold": [
"50%"
],
"pressure_advance": [
"0.02"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"0"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"2"
],
"slow_down_min_speed": [
"10"
],
"support_material_interface_fan_speed": [
"-1"
],
"temperature_vitrification": [
"60"
],
"textured_plate_temp": [
"60"
],
"textured_plate_temp_initial_layer": [
"60"
],
"version": "1.6.0.0"
}

204
files/USBSTICK/OrcaSlicer/KLP1 0.4 nozzle.json Normal file
View File

@ -0,0 +1,204 @@
{
"auxiliary_fan": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"default_filament_profile": [
"My Generic ABS"
],
"default_print_profile": "0.20mm Standard @MyKlipper",
"deretraction_speed": [
"90"
],
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "140",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_radius": "65",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"from": "",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"inherits": "MyKlipper 0.4 nozzle",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y200 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"10000",
"20000"
],
"machine_max_acceleration_y": [
"10000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"20",
"9"
],
"machine_max_jerk_y": [
"20",
"9"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"100",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"50",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG28 ; h1ome all axes\n M117 ;Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"name": "KLP1 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"nozzle_hrc": "0",
"nozzle_type": "undefine",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"print_host": "192.168.5.51",
"print_host_webui": "",
"printable_area": [
"0x0",
"230x0",
"230x230",
"0x230"
],
"printable_height": "210",
"printer_model": "Generic Klipper Printer",
"printer_notes": "",
"printer_settings_id": "KLP1 0.4 nozzle",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "95b7239fb8ae4875a7f2f2b788682a20",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"90"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"template_custom_gcode": "",
"thumbnails": [
"100x100"
],
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"version": "1.6.0.0",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Normal Lift"
]
}

BIN
files/USBSTICK/OrcaSlicer/OrcaSlicer_Windows_Installer_1.7.0.exe Executable file
View File

Binary file not shown.

BIN
files/USBSTICK/OrcaSlicer/安装说明Instructions.pdf Normal file
View File

Binary file not shown.

BIN
files/USBSTICK/System Volume Information/IndexerVolumeGuid Normal file
View File

Binary file not shown.

BIN
files/USBSTICK/System Volume Information/WPSettings.dat Normal file
View File

Binary file not shown.

404
files/USBSTICK/prusa3d software/PrusaSlicer_config_bundle.ini Normal file
View File

@ -0,0 +1,404 @@
# generated by PrusaSlicer 2.6.1+win64 on 2023-10-25 at 07:12:44 UTC
[print:0.2mm-KLP1]
avoid_crossing_curled_overhangs = 1
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 4000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_separation = 0.02
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 10000
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0.15
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 2000
external_perimeter_extrusion_width = 0.42
external_perimeter_speed = 100
external_perimeters_first = 0
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.42
fill_angle = 45
fill_density = 13%
fill_pattern = gyroid
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_speed = 50
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 200
gcode_comments = 0
gcode_label_objects = 1
gcode_resolution = 0.0125
gcode_substitutions =
infill_acceleration = 5000
infill_anchor = 400%
infill_anchor_max = 20
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 7%
infill_speed = 220
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 500
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base]_{filament_type[0]}_{print_time}.gcode
overhang_speed_0 = 0
overhang_speed_1 = 50
overhang_speed_2 = 40
overhang_speed_3 = 20
overhangs = 0
perimeter_acceleration = 3000
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 200
perimeters = 2
post_process =
print_settings_id =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.012
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 130
solid_infill_acceleration = 4000
solid_infill_below_area = 15
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.42
solid_infill_speed = 100
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 0
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 0
thin_walls = 0
threads = 16
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.42
top_solid_infill_acceleration = 4000
top_solid_infill_speed = 200
top_solid_layers = 3
top_solid_min_thickness = 0
travel_acceleration = 10000
travel_speed = 350
travel_speed_z = 0
wall_distribution_count = 1
wall_transition_angle = 25
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[filament:KINGROON ABS]
bed_temperature = 100
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 3
enable_dynamic_fan_speeds = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cost = 0
filament_density = 0
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 25
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = ABS
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 100
first_layer_temperature = 230
full_fan_speed_layer = 5
idle_temperature = nil
inherits =
max_fan_speed = 80
min_fan_speed = 60
min_print_speed = 10
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
slowdown_below_layer_time = 3
start_filament_gcode = ""
temperature = 230
[filament:KINGROON PLA]
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 2
enable_dynamic_fan_speeds = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 0
filament_cost = 0
filament_density = 0
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 25
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_length_toolchange = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 200
full_fan_speed_layer = 4
idle_temperature = nil
inherits =
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
slowdown_below_layer_time = 2
start_filament_gcode = ""
temperature = 200
[printer:KLP1 0.4 nozzle]
autoemit_temperature_commands = 0
bed_custom_model =
bed_custom_texture =
bed_shape = -6.95266e-310x-8.13251e-312,230x-8.13251e-312,230x230,-6.95266e-310x230
before_layer_gcode =
between_objects_gcode =
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile =
default_print_profile =
deretract_speed = 90
end_gcode = G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y200 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = prusalink
inherits =
layer_gcode =
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 10000,10000
machine_max_acceleration_extruding = 5000,1250
machine_max_acceleration_retracting = 5000,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 10000,10000
machine_max_acceleration_y = 10000,10000
machine_max_acceleration_z = 500,500
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,200
machine_max_feedrate_y = 500,200
machine_max_feedrate_z = 500,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 20,10
machine_max_jerk_y = 20,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
max_print_height = 210
min_layer_height = 0.08
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host =
printer_model =
printer_notes =
printer_settings_id =
printer_technology = FFF
printer_variant =
printer_vendor =
printhost_apikey =
printhost_cafile =
remaining_times = 0
retract_before_travel = 1
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 90
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\n\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\n\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ; h1ome all axes\n M117 ;Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n
template_custom_gcode =
thumbnails = 100x100
thumbnails_format = PNG
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
[presets]
print = 0.2mm-KLP1
sla_print =
sla_material =
printer = KLP1 0.4 nozzle
filament = KINGROON PLA

BIN
files/USBSTICK/prusa3d software/prusa3d_win_2_6_1.exe Executable file
View File

Binary file not shown.

9
files/USBSTICK/wpa_supplicant-wlan0.conf Normal file
View File

@ -0,0 +1,9 @@
country=GB
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="Your WIFI name"
psk="Your WIFI password"
key_mgmt=WPA-PSK
}