Ton/LinuxCNC_ArduinoConnector
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

synchronising Settings

Browse Source 
nothing important here
This commit is contained in:
Alexander Richter 2022-11-25 03:04:17 +01:00
parent 036cd64a13
commit 6971d0a677
2 changed files with 24 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
LinuxCNC_ArduinoConnector.ino
View File

@ -46,8 +46,8 @@
//###IO's###
#define DINPUTS
#ifdef DINPUTS
#define INPUTS
#ifdef INPUTS
const int Inputs = 16; //number of inputs using internal Pullup resistor. (short to ground to trigger)
int InPinmap[] = {32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48};
#endif
@ -68,7 +68,7 @@
#define AINPUTS
#ifdef AINPUTS
const int AInputs = 1;
int AInPinmap[] = {A3}; //Potentiometer for SpindleSpeed override
int AInPinmap[] = {94}; //Potentiometer for SpindleSpeed override
int smooth = 200; //number of samples to denoise ADC, try lower numbers on your setup
#endif
@ -76,8 +76,8 @@
#ifdef LPOTIS
const int LPotis = 2;
int LPotiPins[LPotis][2] = {
{96,8}, //Latching Knob Spindle Overdrive on A1, has 9 Positions
{95,3} //Latching Knob Feed Resolution on A2, has 4 Positions
{96,9}, //Latching Knob Spindle Overdrive on A1, has 9 Positions
{95,4} //Latching Knob Feed Resolution on A2, has 4 Positions
};
int margin = 20; //giving it some margin so Numbers dont jitter, make this number smaller if your knob has more than 50 Positions
#endif
@ -98,10 +98,10 @@
//###Misc Settings###
const int timeout = 10000; // timeout after 10 sec not receiving Stuff
#define DEBUG
//#define DEBUG
//Variables for Saving States
#ifdef DINPUTS
#ifdef INPUTS
int InState[Inputs];
int oldInState[Inputs];
#endif
@ -148,7 +148,7 @@ uint16_t value = 0;
void setup() {
#ifdef DINPUTS
#ifdef INPUTS
//setting Inputs with internal Pullup Resistors
for(int i= 0; i<Inputs;i++){
pinMode(InPinmap[i], INPUT_PULLUP);
@ -209,17 +209,17 @@ void loop() {
comalive(); //if nothing is received for 10 sec. blink warning LED
#ifdef DINPUTS
readInputs(); //read Inputs & send
#ifdef INPUTS
readInputs(); //read Inputs & send data
#endif
#ifdef AINPUTS
readAInputs();
readAInputs(); //read Analog Inputs & send data
#endif
#ifdef LPOTIS
// readLPoti(); //read LPotis & send
readLPoti(); //read LPotis & send data
#endif
#ifdef ABSENCODER
readAbsKnob(); //read ABS Encoder & send
readAbsKnob(); //read ABS Encoder & send data
#endif
}
@ -268,6 +268,7 @@ void writeOutputs(int Pin, int Stat){
}
}
}
void writePwmOutputs(int Pin, int Stat){
for(int x = 0; x<PwmOutputs;x++){
if(PwmOutPinmap[x]==Pin){
@ -281,8 +282,8 @@ void writePwmOutputs(int Pin, int Stat){
int readLPoti(){
for(int i= 0;i<LPotis; i++){
int State = analogRead(LPotiPins[i][0])+margin;
Lpoti[i] = 1024/LPotiPins[i][1];
State = State/LPotiPins[i][1];
Lpoti[i] = 1024/(LPotiPins[i][1]-1);
State = State/(LPotiPins[i][1]-1);
if(oldLpoti[i]!= State){
oldLpoti[i] = State;
sendData('L', LPotiPins[i][0],oldLpoti[i]);

17
arduino.py
View File

@ -50,20 +50,20 @@ connection = '/dev/ttyACM0'
# Set how many Inputs you have programmed in Arduino and which pins are Inputs
Inputs = 17
Inputs = 16
InPinmap = [32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48]
# Set how many Outputs you have programmed in Arduino and which pins are Outputs
Outputs = 9
OutPinmap = [10,9,8,7,6,5,4,3,2]
OutPinmap = [10,9,8,7,6,5,4,3,2,21]
# Set how many PWM Outputs you have programmed in Arduino and which pins are PWM Outputs
PwmOutputs = 2
PwmOutPinmap = [12,11]
PwmOutPinmap = [13,11]
# Set how many Analog Inputs you have programmed in Arduino and which pins are Analog Inputs
AInputs = 1
AInPinmap = [79]
AInPinmap = [94]
# Set how many Latching Analog Inputs you have programmed in Arduino and how many latches there are
@ -72,7 +72,7 @@ LPotiLatches = [9,4]
# Set if you have an Absolute Encoder Knob and how many positions it has (only one supported, as i don't think they are very common and propably nobody uses these anyway)
AbsKnob = 1
AbsKnobPos = 30
AbsKnobPos = 31
######## End of Config! ########
@ -159,12 +159,11 @@ while True:
elif data[0] == "A":
c.aIn = data[1]
elif data[0] == "L":
for port in range(LPotiLatches[latches]):
if ("LPoti-%02d %" [port]) == data[1]:
c.LPotiKnob = data[1]
pass
elif data[0] == "K":
c.AbsKnob = data[1]
elif data[0] == "E":
arduino.printline("E:")
else: pass
finally: