formating

This commit is contained in:
Alexander Richter 2023-03-29 12:56:43 +02:00
parent 505a44e8e7
commit 8334fe49a8

View File

@ -1,7 +1,7 @@
# LinuxCNC_ArduinoConnector # LinuxCNC_ArduinoConnector
<img src="/ArduinoChip.svg" width="200"> <img src="/ArduinoChip.svg" width="300" align="left">
By Alexander Richter, info@theartoftinkering.com 2022 By Alexander Richter, info@theartoftinkering.com 2022
please consider supporting me on Patreon: https://www.patreon.com/theartoftinkering please consider supporting me on Patreon: https://www.patreon.com/theartoftinkering
@ -117,9 +117,9 @@ For each Bit one Pin is needed. So for all 32 Positions 5 Pins are needed = 1,2,
The Arduino only works, if LinuxCNC is running and an USB Connection is established. The Arduino only works, if LinuxCNC is running and an USB Connection is established.
To give optical Feedback of the State of the connection a Status LED setting is provided. To give optical Feedback of the State of the connection a Status LED setting is provided.
This can be either an LED connected to an Output Pin or you can select one LED in your Digital LED Chain. This can be either an LED connected to an Output Pin or you can select one LED in your Digital LED Chain.
It will flash slowly after startup, when it waits for communication setup by LinuxCNC. - It will flash slowly after startup, when it waits for communication setup by LinuxCNC.
It will glow constantly when everything works. - It will glow constantly when everything works.
it Will flash short when Connection was lost. - it Will flash short when Connection was lost.
# Serial communication over USB # Serial communication over USB
The Send and receive Protocol is <Signal><PinNumber>:<Pin State> The Send and receive Protocol is <Signal><PinNumber>:<Pin State>