Ton/LinuxCNC_ArduinoConnector
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'dev'

Browse Source
This commit is contained in:
Alexander Richter 2023-07-23 17:36:32 +02:00
commit 8c5e8be6a0
2 changed files with 268 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

197
LinuxCNC_ArduinoConnector.ino
View File

@ -9,7 +9,7 @@
You can create as many digital & analog Inputs, Outputs and PWM Outputs as your Arduino can handle.
You can also generate "virtual Pins" by using latching Potentiometers, which are connected to one analog Pin, but are read in Hal as individual Pins.
Currently the Software provides:
Currently the Software Supports:
- analog Inputs
- latching Potentiometers
- 1 binary encoded selector Switch
@ -29,6 +29,8 @@
Analog Inputs = 'A' -write only -Pin State: 0-1024
Latching Potentiometers = 'L' -write only -Pin State: 0-max Position
binary encoded Selector = 'K' -write only -Pin State: 0-32
rotary encoder = 'R' -write only -Pin State: up/ down / -32768 to 32767
joystick = 'R' -write only -Pin State: up/ down / -32768 to 32767
Keyboard Input:
Matrix Keypad = 'M' -write only -Pin State: Number of Matrix Key.
@ -64,17 +66,17 @@ Communication Status = 'E' -read/Write -Pin State: 0:0
#define INPUTS //Use Arduino IO's as Inputs. Define how many Inputs you want in total and then which Pins you want to be Inputs.
#ifdef INPUTS
const int Inputs = 5; //number of inputs using internal Pullup resistor. (short to ground to trigger)
int InPinmap[] = {37,38,39,40,41};
int InPinmap[] = {52,38,39,40,41};
#endif
//Use Arduino IO's as Toggle Inputs, which means Inputs (Buttons for example) keep HIGH State after Release and Send LOW only after beeing Pressed again.
#define SINPUTS //Define how many Toggle Inputs you want in total and then which Pins you want to be Toggle Inputs.
//#define SINPUTS //Define how many Toggle Inputs you want in total and then which Pins you want to be Toggle Inputs.
#ifdef SINPUTS
const int sInputs = 5; //number of inputs using internal Pullup resistor. (short to ground to trigger)
int sInPinmap[] = {32,33,34,35,36};
#endif
#define OUTPUTS //Use Arduino IO's as Outputs. Define how many Outputs you want in total and then which Pins you want to be Outputs.
//#define OUTPUTS //Use Arduino IO's as Outputs. Define how many Outputs you want in total and then which Pins you want to be Outputs.
#ifdef OUTPUTS
const int Outputs = 9; //number of outputs
int OutPinmap[] = {10,9,8,7,6,5,4,3,2,21};
@ -89,8 +91,8 @@ Communication Status = 'E' -read/Write -Pin State: 0:0
//#define AINPUTS //Use Arduino ADC's as Analog Inputs. Define how many Analog Inputs you want in total and then which Pins you want to be Analog Inputs.
//Note that Analog Pin numbering is different to the Print on the PCB.
#ifdef AINPUTS
const int AInputs = 1;
int AInPinmap[] = {1}; //Potentiometer for SpindleSpeed override
const int AInputs = 2;
int AInPinmap[] = {0,2}; //Potentiometer for SpindleSpeed override
int smooth = 200; //number of samples to denoise ADC, try lower numbers on your setup 200 worked good for me.
#endif
@ -113,7 +115,7 @@ Note that Analog Pin numbering is different to the Print on the PCB.
//#define LPOTIS
#ifdef LPOTIS
const int LPotis = 2;
int LPotiPins[LPotis][2] = {
const int LPotiPins[LPotis][2] = {
{2,9}, //Latching Knob Spindle Overdrive on A1, has 9 Positions
{3,4} //Latching Knob Feed Resolution on A2, has 4 Positions
};
@ -126,6 +128,60 @@ Note that Analog Pin numbering is different to the Print on the PCB.
#endif
#define QUADENC
//Support for Rotatary Encoders with Quadrature Output. Define Pins for A and B Signals for your encoders. Visit https://www.pjrc.com/teensy/td_libs_Encoder.html for further explanation.
#ifdef QUADENC
#include <Encoder.h>
const int QuadEncs = 2; //how many Rotary Encoders do you want?
#define QUADENCS 2
// Encoders have 2 signals, which must be connected to 2 pins. There are three options.
//Best Performance: Both signals connect to interrupt pins.
//Good Performance: First signal connects to an interrupt pin, second to a non-interrupt pin.
//Low Performance: Both signals connect to non-interrupt pins, details below.
//Board Interrupt Pins LED Pin(do not use)
//Teensy 4.0 - 4.1 All Digital Pins 13
//Teensy 3.0 - 3.6 All Digital Pins 13
//Teensy LC 2 - 12, 14, 15, 20 - 23 13
//Teensy 2.0 5, 6, 7, 8 11
//Teensy 1.0 0, 1, 2, 3, 4, 6, 7, 16
//Teensy++ 2.0 0, 1, 2, 3, 18, 19, 36, 37 6
//Teensy++ 1.0 0, 1, 2, 3, 18, 19, 36, 37
//Arduino Due All Digital Pins 13
//Arduino Uno 2, 3 13
//Arduino Leonardo 0, 1, 2, 3 13
//Arduino Mega 2, 3, 18, 19, 20, 21 13
//Sanguino 2, 10, 11 0
Encoder Encoder0(2,3); //A,B Pin
Encoder Encoder1(31,33); //A,B Pin
//Encoder Encoder2(A,B);
//Encoder Encoder3(A,B);
//Encoder Encoder4(A,B);
const int QuadEncSig[] = {1,1}; //define wich kind of Signal you want to generate.
//1= send up or down signal (typical use for selecting modes in hal)
//2= send position signal (typical use for MPG wheel)
const int QuadEncMp[] = {1,4}; //some Rotary encoders send multiple Electronical Impulses per mechanical pulse. How many Electrical impulses are send for each mechanical Latch?
#endif
//#define JOYSTICK //Support of an Rotating Knob that was build in my Machine. It encodes 32 Positions with 5 Pins in Binary. This will generate 32 Pins in LinuxCNC Hal.
#ifdef JOYSTICK
const int JoySticks = 1; // Number of potentiometers connected
const int JoyStickPins[JoySticks*2] = {A0, A1}; // Analog input pins for the potentiometers
const int middleValue = 512; // Middle value of the potentiometer
const int deadband = 20; // Deadband range around the middleValue
const float scalingFactor = 0.01; // Scaling factor to control the impact of distanceFromMiddle
#endif
//The Software will detect if there is an communication issue. When you power on your machine, the Buttons etc won't work, till LinuxCNC is running. THe StatusLED will inform you about the State of Communication.
// Slow Flash = Not Connected
// Steady on = connected
@ -137,7 +193,7 @@ Note that Analog Pin numbering is different to the Print on the PCB.
//#define STATUSLED
#ifdef STATUSLED
const int StatLedPin = 5; //Pin for Status LED
const int StatLedPin = 13; //Pin for Status LED
const int StatLedErrDel[] = {1000,10}; //Blink Timing for Status LED Error (no connection)
const int DLEDSTATUSLED = 1; //set to 1 to use Digital LED instead. set StatLedPin to the according LED number in the chain.
#endif
@ -266,7 +322,18 @@ const int debounceDelay = 50;
#ifdef KEYPAD
byte KeyState = 0;
#endif
#ifdef QUADENC
long EncCount[QuadEncs];
long OldEncCount[QuadEncs];
#endif
#ifdef JOYSTICK
long counter[JoySticks*2] = {0}; // Initialize an array for the counters
long prevCounter[JoySticks*2] = {0}; // Initialize an array for the previous counters
float incrementFactor[JoySticks*2] = {0.0}; // Initialize an array for the incrementFactors
unsigned long lastUpdateTime[JoySticks*2] = {0}; // Store the time of the last update for each potentiometer
#endif
//### global Variables setup###
//Please don't touch them
@ -286,8 +353,6 @@ char cmd = 0;
uint16_t io = 0;
uint16_t value = 0;
void setup() {
#ifdef INPUTS
@ -351,6 +416,7 @@ for(int col = 0; col < numCols; col++) {
}
#endif
//Setup Serial
Serial.begin(115200);
while (!Serial){}
@ -358,6 +424,7 @@ for(int col = 0; col < numCols; col++) {
readCommands();
flushSerial();
Serial.println("E0:0");
delay(200);
#ifdef STATUSLED
StatLedErr(1000,1000);
#endif
@ -391,7 +458,100 @@ void loop() {
readKeypad(); //read Keyboard & send data
#endif
#ifdef QUADENC
readEncoders(); //read Encoders & send data
#endif
#ifdef JOYSTICK
readJoySticks(); //read Encoders & send data
#endif
}
#ifdef JOYSTICK
void readJoySticks() {
for (int i = 0; i < JoySticks*2; i++) {
unsigned long currentTime = millis(); // Get the current time
// Check if it's time to update the counter for this potentiometer
if (currentTime - lastUpdateTime[i] >= 100) { // Adjust 100 milliseconds based on your needs
lastUpdateTime[i] = currentTime; // Update the last update time for this potentiometer
int potValue = analogRead(JoyStickPins[i]); // Read the potentiometer value
// Calculate the distance of the potentiometer value from the middle
int distanceFromMiddle = potValue - middleValue;
// Apply deadband to ignore small variations around middleValue
if (abs(distanceFromMiddle) <= deadband) {
incrementFactor[i] = 0.0; // Set incrementFactor to 0 within the deadband range
} else {
// Apply non-linear scaling to distanceFromMiddle to get the incrementFactor
incrementFactor[i] = pow((distanceFromMiddle * scalingFactor), 3);
}
// Update the counter if the incrementFactor has reached a full number
if (incrementFactor[i] >= 1.0 || incrementFactor[i] <= -1.0) {
counter[i] += static_cast<long>(incrementFactor[i]); // Increment or decrement the counter by the integer part of incrementFactor
incrementFactor[i] -= static_cast<long>(incrementFactor[i]); // Subtract the integer part from incrementFactor
}
// Check if the counter value has changed
if (counter[i] != prevCounter[i]) {
sendData('R',JoyStickPins[i],counter[i]);
// Update the previous counter value with the current counter value
prevCounter[i] = counter[i];
}
}
}
}
#endif
void readEncoders(){
if(QuadEncs>=1){
#if QUADENCS >= 1
EncCount[0] = Encoder0.read()/QuadEncMp[0];
#endif
}
if(QuadEncs>=2){
#if QUADENCS >= 2
EncCount[1] = Encoder1.read()/QuadEncMp[1];
#endif
}
if(QuadEncs>=3){
#if QUADENCS >= 3
EncCount[2] = Encoder2.read()/QuadEncMp[2];
#endif
}
if(QuadEncs>=4){
#if QUADENCS >= 4
EncCount[3] = Encoder3.read()/QuadEncMp[3];
#endif
}
if(QuadEncs>=5){
#if QUADENCS >= 5
EncCount[4] = Encoder4.read()/QuadEncMp[4];
#endif
}
for(int i=0; i<QuadEncs;i++){
if(QuadEncSig[i]==2){
if(OldEncCount[i] != EncCount[i]){
sendData('R',i,EncCount[i]);//send Counter
OldEncCount[i] = EncCount[i];
}
}
if(QuadEncSig[i]==1){
if(OldEncCount[i] < EncCount[i]){
sendData('R',i,1); //send Increase by 1 Signal
OldEncCount[i] = EncCount[i];
}
if(OldEncCount[i] > EncCount[i]){
sendData('R',i,0); //send Increase by 1 Signal
OldEncCount[i] = EncCount[i];
}
}
}
}
@ -510,10 +670,10 @@ int readLPoti(){
#ifdef AINPUTS
int readAInputs(){
unsigned long var = 0;
for(int i= 0;i<AInputs; i++){
int State = analogRead(AInPinmap[i]);
for(int i= 0;i<smooth; i++){// take couple samples to denoise signal
unsigned long var = 0;
for(int d= 0;d<smooth; d++){// take couple samples to denoise signal
var = var+ analogRead(AInPinmap[i]);
}
var = var / smooth;
@ -600,20 +760,13 @@ void readKeypad(){
pinMode(rowPins[row], INPUT_PULLUP);
if (digitalRead(rowPins[row]) == LOW && lastKey != keys[row][col]) {
// A button has been pressed
Serial.print("M");
Serial.print(keys[row][col]);
Serial.print(":");
Serial.println(1);
sendData('M',keys[row][col],1);
lastKey = keys[row][col];
row = numRows;
}
if (digitalRead(rowPins[row]) == HIGH && lastKey == keys[row][col]) {
// The Last Button has been unpressed
Serial.print("M");
Serial.print(keys[row][col]);
Serial.print(":");
Serial.println(0);
sendData('M',keys[row][col],0);
lastKey = 0;
row = numRows;
}

85
arduino.py Normal file → Executable file
View File

@ -51,16 +51,16 @@ connection = '/dev/ttyACM0' #this is the port your Arduino is connected to. You
# Set how many Inputs you have programmed in Arduino and which pins are Inputs, Set Inputs = 0 to disable
Inputs = 5
Inputs = 0
InPinmap = [37,38,39,40,41]
# Set how many Toggled ("sticky") Inputs you have programmed in Arduino and which pins are Toggled Inputs , Set SInputs = 0 to disable
SInputs = 5
SInputs = 0
sInPinmap = [32,33,34,35,36]
# Set how many Outputs you have programmed in Arduino and which pins are Outputs, Set Outputs = 0 to disable
Outputs = 9 #9 Outputs, Set Outputs = 0 to disable
Outputs = 0 #9 Outputs, Set Outputs = 0 to disable
OutPinmap = [10,9,8,7,6,5,4,3,2,21]
# Set how many PWM Outputs you have programmed in Arduino and which pins are PWM Outputs, you can set as many as your Arduino has PWM pins. List the connected pins below.
@ -93,6 +93,25 @@ BinSelKnobPos = 32
SetBinSelKnobValue = [1]
BinSelKnobvalues = [[180,190,200,0,0,0,0,0,0,0,0,0,0,0,0,10,20,30,40,50,60,70,80,90,100,110,120,130,140,150,160,170],
[0.001,0.01,0.1,1]]
#Enable Quadrature Encoders
QuadEncs = 2
QuadEncSig = [2,2]
#1 = send up or down signal (typical use for selecting modes in hal)
#2 = send position signal (typical use for MPG wheel)
#Enable Joystick support.
# Intended for use as MPG. useing the Joystick will update a counter, which can be used as Jog Input.
# Moving the Joystick will either increase or decrease the counter. Modify Jog-scale in hal to increase or decrease speed.
JoySticks = 1 #number of installed Joysticks
JoyStickPins = [54,55] #Pins the Joysticks are connected to.
#in this example X&Y Pins of the Joystick are connected to Pin A0& A1. Remember, to use the Atmega Pin names here!
# for more than one Joystick just add the other pins to the array for example: JoyStickPins = [54,55,56,57]
# Set how many Digital LED's you have connected.
DLEDcount = 0
@ -115,8 +134,8 @@ DLEDcount = 0
Keypad = 0 # Set to 1 to Activate
LinuxKeyboardInput = 1 #Activate direct Keyboard integration to Linux.
Columns = 4
Rows = 4
Columns = 24
Rows = 8
Chars = [ #here you must define as many characters as your Keypad has keys. calculate columns * rows . for example 4 *4 = 16. You can write it down like in the example for ease of readability.
"1", "2", "3", "A",
"4", "5", "6", "B",
@ -155,6 +174,11 @@ if LinuxKeyboardInput:
Inputs = Inputs+ SInputs
InPinmap += sInPinmap
# Storing Variables for counter timing Stuff
counter_last_update = {}
min_update_interval = 100
######## SetUp of HalPins ########
# setup Input halpins
@ -204,6 +228,22 @@ if Keypad > 0:
pass #if destination is set to Linux, don't register a Hal Pin for this key.
else:
c.newpin("keypad.{}".format(Chars[port]), hal.HAL_BIT, hal.HAL_IN)
#setup JoyStick Pins
if JoySticks > 0:
for port in range(JoySticks*2):
c.newpin("Counter.{}".format(JoyStickPins[port]), hal.HAL_S32, hal.HAL_OUT)
if QuadEncs > 0:
for port in range(QuadEncs):
if QuadEncSig[port] == 1:
c.newpin("CounterUp.{}".format(port), hal.HAL_BIT, hal.HAL_OUT)
c.newpin("CounterDown.{}".format(port), hal.HAL_BIT, hal.HAL_OUT)
if QuadEncSig[port] == 2:
c.newpin("Counter.{}".format(port), hal.HAL_S32, hal.HAL_OUT)
c.ready()
#setup Serial connection
@ -234,8 +274,8 @@ def extract_nbr(input_str):
return 0
out_number = ''
for ele in input_str:
if ele.isdigit():
for i, ele in enumerate(input_str):
if ele.isdigit() or (ele == '-' and i+1 < len(input_str) and input_str[i+1].isdigit()):
out_number += ele
return int(out_number)
@ -272,7 +312,6 @@ def managageOutputs():
while True:
try:
data = arduino.readline().decode('utf-8') #read Data received from Arduino and decode it
if (Debug):print ("I received:{}".format(data))
@ -281,7 +320,7 @@ while True:
try:
cmd = data[0][0]
if cmd == "":
if (Debug):print ("No Command!:{}.".format(cmd))
if (Debug):print ("No Command!:{}".format(cmd))
else:
if not data[0][1]:
@ -289,8 +328,8 @@ while True:
else:
io = extract_nbr(data[0])
value = extract_nbr(data[1])
if value<0: value = 0
#if value<0: value = 0
if (Debug):print ("No Command!:{}.".format(cmd))
if cmd == "I":
firstcom = 1
@ -354,7 +393,27 @@ while True:
c["keypad.{}".format(Chars[io])] = 0
if(Debug):print("keypad{}:{}".format(Chars[io],0))
elif cmd == "R":
firstcom = 1
if JoySticks > 0:
for pins in range(JoySticks*2):
if (io == JoyStickPins[pins]):
c["Counter.{}".format(io)] = value
if (Debug):print("Counter.{}:{}".format(io,value))
if QuadEncs > 0:
if QuadEncSig[io]== 1:
if value == 0:
c["CounterDown.{}".format(io)] = 1
time.sleep(0.05)
c["CounterDown.{}".format(io)] = 0
time.sleep(0.05)
if value == 1:
c["CounterUp.{}".format(io)] = 1
time.sleep(0.05)
c["CounterUp.{}".format(io)] = 0
time.sleep(0.05)
if QuadEncSig[io]== 2:
c["Counter.{}".format(io)] = value
elif cmd == 'E':
arduino.write(b"E0:0\n")
@ -379,3 +438,5 @@ while True:
if (Debug):print("keepAlive")
event = time.time()
time.sleep(0.01)