From a1875bfd153895f310e3228eb785ffa86c3a2071 Mon Sep 17 00:00:00 2001
From: Alexander Richter <alex@3dator.com>
Date: Wed, 29 Mar 2023 14:17:52 +0200
Subject: [PATCH] made setttings standart Disabled

---
 LinuxCNC_ArduinoConnector.ino | 13 ++++++++-----
 README.md                     | 19 ++++++++++---------
 2 files changed, 18 insertions(+), 14 deletions(-)

diff --git a/LinuxCNC_ArduinoConnector.ino b/LinuxCNC_ArduinoConnector.ino
index f897afe..b1d0df6 100644
--- a/LinuxCNC_ArduinoConnector.ino
+++ b/LinuxCNC_ArduinoConnector.ino
@@ -70,13 +70,13 @@
   int OutPinmap[] = {10,9,8,7,6,5,4,3,2,21};
 #endif
 
-#define PWMOUTPUTS                     //Use Arduino PWM Capable IO's as PWM Outputs. Define how many  PWM Outputs you want in total and then which Pins you want to be  PWM Outputs.
+//#define PWMOUTPUTS                     //Use Arduino PWM Capable IO's as PWM Outputs. Define how many  PWM Outputs you want in total and then which Pins you want to be  PWM Outputs.
 #ifdef PWMOUTPUTS
   const int PwmOutputs = 2;              //number of outputs
   int PwmOutPinmap[] = {12,11};
 #endif
 
-#define AINPUTS                       //Use Arduino ADC's as Analog Inputs. Define how many Analog Inputs you want in total and then which Pins you want to be Analog Inputs.
+//#define AINPUTS                       //Use Arduino ADC's as Analog Inputs. Define how many Analog Inputs you want in total and then which Pins you want to be Analog Inputs.
                                         //Note that Analog Pin numbering is different to the Print on the PCB.
 #ifdef AINPUTS
   const int AInputs = 1; 
@@ -109,7 +109,7 @@
   int margin = 20;                      //giving it some margin so Numbers dont jitter, make this number smaller if your knob has more than 50 Positions
 #endif
 
-#define ABSENCODER                   //Support of an Rotating Knob that was build in my Machine. It encodes 32 Positions with 5 Pins in Binary. This will generate 32 Pins in LinuxCNC Hal.
+//#define ABSENCODER                   //Support of an Rotating Knob that was build in my Machine. It encodes 32 Positions with 5 Pins in Binary. This will generate 32 Pins in LinuxCNC Hal.
 #ifdef ABSENCODER
   const int AbsEncPins[] = {27,28,31,29,30};  //1,2,4,8,16
 #endif
@@ -158,8 +158,8 @@
   const int DLEDBrightness = 70;         //Brightness of the LED's 0-100%
  
   int DledOnColors[DLEDcount][3] = {
+                  {0,0,255},
                   {255,0,0},
-                  {0,255,255},
                   {0,255,0},
                   {0,255,0},
                   {0,255,0},
@@ -170,7 +170,7 @@
 
   int DledOffColors[DLEDcount][3] = {
                   {0,0,0},
-                  {0,255,0},
+                  {0,0,0},
                   {255,0,0},
                   {255,0,0},
                   {255,0,0},
@@ -185,6 +185,9 @@ Adafruit_NeoPixel strip(DLEDcount, DLEDPin, NEO_GRB + NEO_KHZ800);//Color sequen
 
 #endif
 
+//#######################################   END OF CONFIG     ###########################
+
+
 
 //#define DEBUG
 
diff --git a/README.md b/README.md
index 60d2e0f..1acaa8a 100644
--- a/README.md
+++ b/README.md
@@ -19,18 +19,19 @@ This way, you can make them turn on or shut off or have them Change color, from
 
 
 Currently the Software Supports: 
-- analog Inputs
-- digital Inputs
-- digital Outputs
-- support of Digital RGB LEDs like WS2812 or PL9823
-- latching Potentiometers
-- 1 absolute encoder input
+- Analog Inputs
+- Digital Inputs
+- Digital Outputs
+- PWM Outputs
+- Digital RGB LEDs like WS2812 or PL9823
+- latching Potentiometers / Selector Switches 
+- 1 absolute encoder Selector Switch
 
 TODO  
--[ ] Matrix Keyboard Support
+- Matrix Keyboard Support
 
-Should i add this?  
--[ ] RC Servo  Support
+Should this be supported?  
+- RC Servo  Support
 
 # Compatiblity
 This software works with LinuxCNC 2.8, 2.9 and 2.10.