Ton/LinuxCNC_ArduinoConnector
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

tidy up

Browse Source
This commit is contained in:
Alexander Richter 2023-03-28 18:54:54 +02:00
parent 6415e4af50
commit fa04530a67
3 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
LinuxCNC_ArduinoConnector.ino
View File

@ -58,7 +58,7 @@
#endif #endif
//Use Arduino IO's as Toggle Inputs, which means Inputs (Buttons for example) keep HIGH State after Release and Send LOW only after beeing Pressed again. //Use Arduino IO's as Toggle Inputs, which means Inputs (Buttons for example) keep HIGH State after Release and Send LOW only after beeing Pressed again.
#define SINPUTS //Define how many Sticky Inputs you want in total and then which Pins you want to be Sticky Inputs. #define SINPUTS //Define how many Toggle Inputs you want in total and then which Pins you want to be Toggle Inputs.
#ifdef SINPUTS #ifdef SINPUTS
const int sInputs = 5; //number of inputs using internal Pullup resistor. (short to ground to trigger) const int sInputs = 5; //number of inputs using internal Pullup resistor. (short to ground to trigger)
int sInPinmap[] = {32,33,34,35,36}; int sInPinmap[] = {32,33,34,35,36};

2
README.md
View File

@ -67,7 +67,7 @@ The Send and receive Protocol is <Signal><PinNumber>:<Pin State>
To begin Transmitting Ready is send out and expects to receive E: to establish connection. Afterwards Data is exchanged. To begin Transmitting Ready is send out and expects to receive E: to establish connection. Afterwards Data is exchanged.
Data is only send everythime it changes once. Data is only send everythime it changes once.
Inputs = 'I' -write only -Pin State: 0,1 Inputs & Toggle Inputs = 'I' -write only -Pin State: 0,1
Outputs = 'O' -read only -Pin State: 0,1 Outputs = 'O' -read only -Pin State: 0,1
PWM Outputs = 'P' -read only -Pin State: 0-255 PWM Outputs = 'P' -read only -Pin State: 0-255
Digital LED Outputs = 'D' -read only -Pin State: 0,1 Digital LED Outputs = 'D' -read only -Pin State: 0,1

2
arduino.py
View File

@ -21,7 +21,7 @@ import serial, time, hal
# To begin Transmitting Ready is send out and expects to receive E: to establish connection. Afterwards Data is exchanged. # To begin Transmitting Ready is send out and expects to receive E: to establish connection. Afterwards Data is exchanged.
# Data is only send everythime it changes once. # Data is only send everythime it changes once.
# Inputs = 'I' -write only -Pin State: 0,1 # Inputs & Toggle Inputs = 'I' -write only -Pin State: 0,1
# Outputs = 'O' -read only -Pin State: 0,1 # Outputs = 'O' -read only -Pin State: 0,1
# PWM Outputs = 'P' -read only -Pin State: 0-255 # PWM Outputs = 'P' -read only -Pin State: 0-255
# Digital LED Outputs = 'D' -read only -Pin State: 0,1 # Digital LED Outputs = 'D' -read only -Pin State: 0,1