P1/utilities2a (2).yaml

substitutions:
  device_name: utilities2
  friendly_name: um2
esphome:
  name: ${device_name}
  project:
    name: d1.utilities-meter
    version: "1.0.0"
  name_add_mac_suffix: true

esp8266:
  board: esp01_1m
  restore_from_flash: true


# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key
  reboot_timeout: 30min
  
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  manual_ip:
    static_ip: 192.168.1.171
    gateway: 192.168.1.254
    subnet: 255.255.255.0    
    dns1: 192.168.1.1
# Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret ap_ssid
    password: !secret ap_password

captive_portal:

web_server:
  port: 80
ota:
  - platform: !secret ota_platform
    password: !secret ota_password

status_led:
  pin:
    number: GPIO02
    inverted: true
time:
  - platform: sntp
    id: sntp_time

i2c:
  sda: GPIO04
  scl: GPIO05
  scan: true
  id: bus_a
  frequency: 400kHz    
# Display configuration (SSD1306 128x64 OLED)
display:
  - platform: ssd1306_i2c
    model: "SH1106 128x32"
    address: 0x3C
    id: my_display
    update_interval: 0.5s
    lambda: |-
      it.clear();
      it.printf(0, 0, id(fontPPT), "Menu: %s", 
        id(menu_level) == 1 ? "Status" : 
        id(menu_level) == 2 ? "Settings" : "Overview");
      
      // Content for each menu level
      if (id(menu_level) == 1) {
        it.printf(0, 11, id(fontBody), "Uptime: %ds", (int)(millis() / 1000));
        it.printf(0, 22, id(fontBody), "Uptime: %ds", (int)(millis() / 1000));
        it.printf(0, 32, id(fontBody), "Uptime: %ds", (int)(millis() / 1000));        
      } else if (id(menu_level) == 2) {
        it.clear();
        //it.printf(0, 1, id(fontBody), "BLmax_time2run: %ds", id(BLmax_time2run));
        //it.printf(0, 12, id(fontBody), "BLruntime: %ds", id(BLruntime));
        //it.printf(0, 23, id(fontBody), "BLruntimeX: %ds", id(BLruntimeX));        
        //        it.printf(0, 11, id(fontBody), "WiFi: %.0f dBm", 22.0);
      } else {
        it.printf(0, 11, id(fontBody), "Button: %s", id(display_button).state ? "Pressed" : "Released");
      }
# Button configuration
binary_sensor:
  - platform: gpio
    pin: 
      number: GPIO013
      mode: INPUT_PULLUP
      inverted: true
    name: "Display Button"
    id: display_button
    on_press:
      - logger.log: "Button pressed"
      - lambda: |-
          if (id(oled_on)==true){// als oled aan is dan pas door het menu stappen
            id(menu_level) = (id(menu_level) % 3) + 1; // Cycle through 1, 2, 3
          }
          id(my_display).update(); // Force display update
      - script.execute: reset_oled_timeout  #start de displaytijd opnieuw
    filters:
      - delayed_on: 30ms
      - delayed_off: 30ms
light:
  - platform: monochromatic
    name: displayBL
    id: displayBL
    output: my_display1
 #   restore_mode: ALWAYS_ON
    initial_state:
      state: true      
    on_turn_on:
      - logger.log: 
          format: "Display On begin: %d"
          args: [ 'id(oled_on)' ]
#      - lambda: id(my_display).turn_on();
      - script.execute: reset_oled_timeout          

    on_turn_off:
      then:
      - logger.log:
          format: "Display Off: %d"
          args: [ 'id(oled_on)' ]
      - lambda: id(my_display).turn_off();     
globals:
  - id: oled_on
    type: bool
    restore_value: no
    initial_value: "true"
  - id: menu_level
    type: int
    restore_value: no
    initial_value: '1' # Start at Status menu      

interval:
  - interval: 5s
    then:
      - if:
          condition:
            - not:
                - script.is_running: oled_timeout
          then:
            - script.execute: oled_timeout

script:
  - id: reset_oled_timeout
    then:
      - lambda: |-
          id(oled_on) = true;
      - light.turn_on: displayBL #synchronize the button in HA
      - lambda: id(my_display).turn_on();
      - script.stop: oled_timeout
      - script.execute: oled_timeout

  - id: oled_timeout
    mode: restart
    then:
      - delay: 5s
      - lambda: |-
          id(oled_on) = false;
#          id(displayBL).publish_state(false);
      - lambda: id(my_display).turn_off();
      - light.turn_off: displayBL #synchronize the button in HA

output:
  - platform: template
    id: my_display1
    type: float
    write_action:
      then:
      - lambda: id(my_display).set_contrast(state);    

text_sensor:
  - platform: wifi_info
    ip_address:
      name: "IP Address"
    ssid:
      name: "WiFi SSID"
    bssid:
      name: "WiFi BSSID"

  - platform: version
    name: "ESPHome Version"
    hide_timestamp: false

# Font for display
font:
  - file: "fonts/Helvetica.ttf"  # You'll need to upload this font file
    id: fontPPT
    size: 12
  - file: "fonts/Helvetica.ttf"  # You'll need to upload this font file
    id: fontBody
    size: 10