Sunton, van alles door elkaar

ESP32-Sunton/esp32-2432s028/2432-autoexec.be

@@ -0,0 +1,3 @@
+# simple `autoexec.be` to run HASPmota using the default `pages.jsonl`
+import haspmota
+haspmota.start()

ESP32-Sunton/esp32-2432s028/2432-display.ini

@@ -0,0 +1,39 @@
+:H,ILI9341,240,320,16,SPI,1,*,*,*,*,*,*,*,40
+:S,2,1,1,0,40,20
+:r,1
+:I
+EF,3,03,80,02
+CF,3,00,C1,30
+ED,4,64,03,12,81
+E8,3,85,00,78
+CB,5,39,2C,00,34,02
+F7,1,20
+EA,2,00,00
+C0,1,23
+C1,1,10
+C5,2,3e,28
+C7,1,86
+36,1,48
+37,1,00
+3A,1,55
+B1,2,00,18
+B6,3,08,82,27
+F2,1,00
+26,1,01
+E0,0F,0F,31,2B,0C,0E,08,4E,F1,37,07,10,03,0E,09,00
+E1,0F,00,0E,14,03,11,07,31,C1,48,08,0F,0C,31,36,0F
+11,80
+29,80
+:o,28
+:O,29
+:A,2A,2B,2C,16
+:R,36
+:0,48,00,00,00
+:1,28,00,00,00
+:2,88,00,00,00
+:3,E8,00,00,00
+:i,20,21
+:TS,33,-1,2
+:B,20,0
+:M,150,2780,150,5100
+#

ESP32-Sunton/esp32-2432s028/autoexec.be

@@ -0,0 +1,3 @@
+# simple `autoexec.be` to run HASPmota using the default `pages.jsonl`
+import haspmota
+haspmota.start()

ESP32-Sunton/esp32-2432s028/display.ini

@@ -0,0 +1,39 @@
+:H,ILI9341,240,320,16,SPI,1,*,*,*,*,*,*,*,40
+:S,2,1,1,0,40,20
+:r,1
+:I
+EF,3,03,80,02
+CF,3,00,C1,30
+ED,4,64,03,12,81
+E8,3,85,00,78
+CB,5,39,2C,00,34,02
+F7,1,20
+EA,2,00,00
+C0,1,23
+C1,1,10
+C5,2,3e,28
+C7,1,86
+36,1,48
+37,1,00
+3A,1,55
+B1,2,00,18
+B6,3,08,82,27
+F2,1,00
+26,1,01
+E0,0F,0F,31,2B,0C,0E,08,4E,F1,37,07,10,03,0E,09,00
+E1,0F,00,0E,14,03,11,07,31,C1,48,08,0F,0C,31,36,0F
+11,80
+29,80
+:o,28
+:O,29
+:A,2A,2B,2C,16
+:R,36
+:0,48,00,00,00
+:1,28,00,00,00
+:2,88,00,00,00
+:3,E8,00,00,00
+:i,20,21
+:TS,33,-1,2
+:B,20,0
+:M,150,2780,150,5100
+#

ESP32-Sunton/esp32-2432s028/pages.jsonl

@@ -0,0 +1,47 @@
+{"page":0,"comment":"---------- Upper stat line ----------"}
+
+{"id":11,"obj":"label","x":0,"y":0,"w":320,"pad_right":90,"h":22,"bg_color":"#D00000","bg_opa":255,"radius":0,"border_side":0,"text":"Zwembad","text_font":"montserrat-20"}
+
+{"id":15,"obj":"lv_wifi_arcs","x":291,"y":0,"w":29,"h":22,"radius":0,"border_side":0,"bg_color":"#000000","line_color":"#FFFFFF"}
+{"id":16,"obj":"lv_clock","x":232,"y":3,"w":55,"h":16,"radius":0,"border_side":0}
+
+{"comment":"---------- Bottom buttons - prev/home/next ----------"}
+{"id":101,"obj":"btn","x":20,"y":210,"w":80,"h":25,"action":"prev","bg_color":"#1fa3ec","radius":10,"border_side":1,"text":"\uF053","text_font":"montserrat-20"}
+{"id":102,"obj":"btn","x":120,"y":210,"w":80,"h":25,"action":"back","bg_color":"#1fa3ec","radius":10,"border_side":1,"text":"\uF015","text_font":"montserrat-20"}
+{"id":103,"obj":"btn","x":220,"y":210,"w":80,"h":25,"action":"next","bg_color":"#1fa3ec","radius":10,"border_side":1,"text":"\uF054","text_font":"montserrat-20"}
+
+{"page":1,"comment":"---------- Page 1 ----------"}
+{"id":0,"bg_color":"#0000A0","bg_grad_color":"#000000","bg_grad_dir":1,"text_color":"#FFFFFF"}
+
+{"id":2,"obj":"arc","x":20,"y":65,"w":80,"h":100,"border_side":0,"type":0,"rotation":0,"start_angle":180,"end_angle":0,"start_angle1":180,"value_font":12,"value_ofs_x":0,"value_ofs_y":-14,"bg_opa":0,"text":"--.-°C","min":-10,"max":100,"val":0,"val_rule":"DS18B20-1#Temperature","val_rule_formula":"val","text_rule":"DS18B20-1#Temperature","text_rule_format":"%2.1f °C"}
+{"id":3,"obj":"arc","x":120,"y":65,"w":80,"h":100,"border_side":0,"type":0,"rotation":0,"start_angle":180,"end_angle":0,"start_angle1":180,"value_font":12,"value_ofs_x":0,"value_ofs_y":-14,"bg_opa":0,"text":"--.-°C","min":-10,"max":100,"val":0,"val_rule":"DS18B20-2#Temperature","val_rule_formula":"val","text_rule":"DS18B20-2#Temperature","text_rule_format":"%2.1f °C"}
+{"id":4,"obj":"arc","x":220,"y":65,"w":80,"h":100,"border_side":0,"type":0,"rotation":0,"start_angle":180,"end_angle":0,"start_angle1":180,"value_font":12,"value_ofs_x":0,"value_ofs_y":-14,"bg_opa":0,"text":"--.-°C","min":40,"max":200,"val":0,"val_rule":"ESP32#Temperature","val_rule_formula":"val * 10","text_rule":"ESP32#Temperature","text_rule_format":"%2.1f °C"}
+
+{"id":5,"obj":"label","x":2,"y":35,"w":120,"text":"Temperature","align":2}
+{"id":6,"obj":"label","x":20,"y":115,"w":60,"text":"Dak","align":1}
+{"id":7,"obj":"label","x":120,"y":115,"w":50,"text":"in","align":1}
+{"id":8,"obj":"label","x":220,"y":115,"w":50,"text":"uit","align":1}
+
+
+{"page":2,"comment":"---------- Page 2 ----------"}
+{"id":0,"bg_color":"#0000A0","bg_grad_color":"#000000","bg_grad_dir":1,"text_color":"#FFFFFF"}
+
+{"comment":"---------- Wifi status ----------"}
+{"id":20,"obj":"lv_wifi_graph","x":257,"y":25,"w":60,"h":40,"radius":0}
+{"id":21,"obj":"lv_tasmota_info","x":3,"y":25,"w":251,"h":40,"radius":0}
+{"id":22,"obj":"lv_tasmota_log","x":3,"y":68,"w":314,"h":90,"radius":0,"text_font":12}
+
+
+lv_obj_t * qr = lv_qrcode_create(lv_scr_act());
+lv_qrcode_set_size(qr, 150);
+lv_qrcode_set_dark_color(qr, fg_color);
+lv_qrcode_set_light_color(qr, bg_color);
+
+/*Set data*/
+const char * data = "https://lvgl.io";
+lv_qrcode_update(qr, data, strlen(data));
+lv_obj_center(qr);
+
+/*Add a border with bg_color*/
+lv_obj_set_style_border_color(qr, bg_color, 0);
+lv_obj_set_style_border_width(qr, 5, 0);

ESP32-Sunton/esp32-3248s035/display.ini

@@ -0,0 +1,37 @@
+:H,ST7796,480,320,16,SPI,1,*,*,*,*,*,*,*,40
+:S,2,1,1,0,40,20
+:I
+EF,3,03,80,02
+CF,3,00,C1,30
+ED,4,64,03,12,81
+E8,3,85,00,78
+CB,5,39,2C,00,34,02
+F7,1,20
+EA,2,00,00
+C0,1,23
+C1,1,10
+C5,2,3e,28
+C7,1,86
+36,1,48
+37,1,00
+3A,1,55
+B1,2,00,18
+B6,3,08,82,27
+F2,1,00
+26,1,01
+E0,0F,0F,31,2B,0C,0E,08,4E,F1,37,07,10,03,0E,09,00
+E1,0F,00,0E,14,03,11,07,31,C1,48,08,0F,0C,31,36,0F
+11,80
+29,80
+:o,28
+:O,29
+:A,2A,2B,2C
+:R,36
+:0,28,00,00,01
+:1,88,00,00,02
+:2,E8,00,00,03
+:3,48,00,00,00
+:r,0
+:i,20,21
+:TI1,5d,32,33,21,25
+#

ESP32-Sunton/platformio.ini

@@ -0,0 +1,126 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter, extra scripting
+;   Upload options: custom port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;
+; Please visit documentation for the other options and examples
+; http://docs.platformio.org/en/stable/projectconf.html
+;
+; *********************************************************************
+; *** Selection of Tasmota build variant is done with VSC
+; *** alternatively can be done in: platformio_override.ini
+; *** See example: platformio_override_sample.ini
+; *********************************************************************
+
+[platformio]
+description                 = Provide ESP8266 / ESP32 based devices with Web, MQTT and OTA firmware
+src_dir                     = tasmota
+lib_dir                     = lib/default
+boards_dir                  = boards
+build_cache_dir             = .cache
+extra_configs               = platformio_tasmota32.ini
+                              platformio_tasmota_env.ini
+                              platformio_tasmota_env32.ini
+                              platformio_override.ini
+                              platformio_tasmota_cenv.ini
+
+[common]
+platform                    = ${core.platform}
+platform_packages           = ${core.platform_packages}
+framework                   = arduino
+board                       = esp8266_1M
+board_build.filesystem      = littlefs
+custom_unpack_dir           = unpacked_littlefs
+build_unflags               = ${core.build_unflags}
+build_flags                 = ${core.build_flags}
+monitor_speed               = 115200
+; *** Upload Serial reset method for Wemos and NodeMCU
+upload_resetmethod          = nodemcu
+extra_scripts               = ${esp_defaults.extra_scripts}
+lib_archive                 = no
+lib_ldf_mode                = chain
+lib_compat_mode             = strict
+shared_libdeps_dir          = lib
+lib_extra_dirs              =
+                              lib/lib_basic
+                              lib/lib_i2c
+                              lib/lib_display
+                              lib/lib_ssl
+                              lib/lib_audio
+                              lib/lib_rf
+                              lib/lib_div
+
+[tasmota]
+; *** Settings here do NOT affect firmware building ***
+; Uncomment if you do NOT want gzipped map file(s)
+;disable_map_gz = 1
+; Uncomment and specify a folder where to place the map file(s) (default set to folder build_output)
+;map_dir = /tmp/map_files/
+; Uncomment if you do NOT want additionally gzipped firmware file(s) at all
+disable_bin_gz = 1
+; Uncomment if you want additionally gzipped esp32x firmware file(s)
+;enable_esp32_gz = 1
+; Uncomment and specify a folder where to place the firmware file(s) (default set to folder build_output)
+;bin_dir = /tmp/bin_files/
+
+[scripts_defaults]
+extra_scripts               = pre:pio-tools/pre_source_dir.py
+                              pre:pio-tools/set_partition_table.py
+                              pre:pio-tools/override_copy.py
+                              post:pio-tools/strip-floats.py
+
+[esp_defaults]
+extra_scripts               = post:pio-tools/name-firmware.py
+                              post:pio-tools/gzip-firmware.py
+                              post:pio-tools/metrics-firmware.py
+                              post:pio-tools/custom_target.py
+;                              post:pio-tools/obj-dump.py
+                              ${scripts_defaults.extra_scripts}
+; *** remove undesired all warnings
+build_unflags               = -Wall
+;                              -mtarget-align
+                              -Wdeprecated-declarations
+build_flags                 = -DCORE_DEBUG_LEVEL=0
+                              -Wl,-Map,firmware.map
+                              -Wno-deprecated-declarations
+;                              -mno-target-align
+                              -mtarget-align
+                              -free
+                              -fipa-pta
+                              -Wreturn-type
+                              -DTASMOTA  ; flag indicating that we are compiling Tasmota
+; *********************************************************************
+; *** Use custom settings from file user_config_override.h
+                              -DUSE_CONFIG_OVERRIDE
+; *********************************************************************
+
+[esp82xx_defaults]
+extra_scripts               = ${esp_defaults.extra_scripts}
+build_flags                 = ${esp_defaults.build_flags}
+                              -DNDEBUG
+                              -DFP_IN_IROM
+                              -DBEARSSL_SSL_BASIC
+                              ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
+                              -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
+                              -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH
+                              ; -DPIO_FRAMEWORK_ARDUINO_LWIP2_IPV6_HIGHER_BANDWIDTH -DUSE_IPV6 ; enables IPv6
+                              ; VTABLES in Flash
+                              -DVTABLES_IN_FLASH
+                              ; remove the 4-bytes alignment for PSTR()
+                              -DPSTR_ALIGN=1
+                              ; restrict to minimal mime-types
+                              -DMIMETYPE_MINIMAL
+                              ; uncomment the following to enable TLS with 4096 RSA certificates
+                              ;-DUSE_4K_RSA
+
+[core]
+; *** Esp8266 Tasmota modified Arduino core based on core 2.7.4. Added Backport for PWM selection
+platform                    = https://github.com/tasmota/platform-espressif8266/releases/download/2023.04.00/platform-espressif8266.zip
+platform_packages           =
+build_unflags               = ${esp_defaults.build_unflags}
+build_flags                 = ${esp82xx_defaults.build_flags}
+; *** Use ONE of the two PWM variants. Tasmota default is Locked PWM
+                              ;-DWAVEFORM_LOCKED_PHASE
+                              -DWAVEFORM_LOCKED_PWM
+

ESP32-Sunton/platformio_override.ini

@@ -0,0 +1,164 @@
+; ***  Example PlatformIO Project Configuration Override File   ***
+; ***  Changes done here override settings in platformio.ini    ***
+;
+; *****************************************************************
+; ***  to activate rename this file to platformio_override.ini  ***
+; *****************************************************************
+;
+; Please visit documentation for the options and examples
+; http://docs.platformio.org/en/stable/projectconf.html
+
+[platformio]
+; For best Gitpod performance remove the ";" in the next line. Needed Platformio files are cached and installed at first run
+core_dir = .platformio
+; For unrelated compile errors with Windows it can help to shorten Platformio project path
+;workspace_dir = c:\.pio
+;extra_configs           = platformio_tasmota_user_env.ini
+
+; *** Build/upload environment
+default_envs            =
+; *** Uncomment the line(s) below to select version(s)
+;                          tasmota
+;                          tasmota-debug
+;                          tasmota-minimal
+;                          tasmota-lite
+;                          tasmota-knx
+;                          tasmota-sensors
+;                          tasmota-display
+;                          tasmota-zbbridge
+;                          tasmota-ir
+;                          tasmota32
+;                          tasmota32-zbbrdgpro
+;                          tasmota32-bluetooth
+;                          tasmota32-webcam
+;                          tasmota32-knx
+                          tasmota32-lvgl
+;                          tasmota32-ir
+;                          tasmota32solo1
+;                          tasmota32c3
+;                          tasmota32c3cdc
+;                          tasmota32s2
+;                          tasmota32s2cdc
+;                          tasmota32s3
+;                          tasmota32s3cdc
+;                          tasmota32-odroidgo
+;                          tasmota32-core2
+;                          tasmota32-nspanel
+
+
+[env]
+;build_unflags           = ${common.build_unflags}
+;                          -Wswitch-unreachable
+;build_flags             = ${common.build_flags}
+;                          -DF_CRYSTAL=26000000
+;                          -Wno-switch-unreachable
+; *** Optional Debug messages
+;                         -DDEBUG_TASMOTA_CORE
+;                         -DDEBUG_TASMOTA_DRIVER
+;                         -DDEBUG_TASMOTA_SENSOR
+; Build variant 1MB = 1MB firmware no filesystem (default)
+;board                   = ${common.board}
+; Build variant 2MB = 1MB firmware, 1MB filesystem (most Shelly devices)
+;board                   = esp8266_2M1M
+; Build variant 4MB = 1MB firmware, 1MB OTA, 2MB filesystem (WEMOS D1 Mini, NodeMCU, Sonoff POW)
+;board                   = esp8266_4M2M
+;board_build.f_cpu       = 160000000L
+;board_build.f_flash     = 40000000L
+; *** Define serial port used for erasing/flashing/terminal
+;upload_port             = COM4
+;monitor_port            = COM4
+lib_ignore              =
+                          Servo(esp8266)
+                          ESP8266AVRISP
+                          ESP8266LLMNR
+                          ESP8266NetBIOS
+                          ESP8266SSDP
+                          SP8266WiFiMesh
+                          Ethernet(esp8266)
+                          GDBStub
+                          TFT_Touch_Shield_V2
+                          ESP8266HTTPUpdateServer
+                          ESP8266WiFiMesh
+                          EspSoftwareSerial
+                          SPISlave
+                          Hash
+; Disable next if you want to use ArduinoOTA in Tasmota (default disabled)
+                          ArduinoOTA
+lib_extra_dirs          = ${library.lib_extra_dirs}
+
+
+[env:tasmota32_base]
+; *** Uncomment next lines ";" to enable development Tasmota Arduino version ESP32
+;platform                = https://github.com/tasmota/platform-espressif32.git
+;platform_packages       = framework-arduinoespressif32 @ https://github.com/Jason2866/esp32-arduino-lib-builder/releases/download/1271/framework-arduinoespressif32-lwip_timeout-ed6742e7f0.zip
+;                          framework-arduino-solo1 @ https://github.com/Jason2866/esp32-arduino-lib-builder/releases/download/1273/framework-arduinoespressif32-solo1-release_v4.4-804d12ce82.zip
+;                          framework-arduino-ITEAD @ https://github.com/Jason2866/esp32-arduino-lib-builder/releases/download/1272/framework-arduinoespressif32-ITEAD-release_v4.4-804d12ce82.zip
+;build_unflags           = ${esp32_defaults.build_unflags}
+;build_flags             = ${esp32_defaults.build_flags}
+;board                   = esp32
+;board_build.f_cpu       = 240000000L
+;board_build.f_flash     = 40000000L
+;board_build.flash_mode  = qio
+;board_build.flash_size  = 8MB
+;board_upload.maximum_size = 8388608
+;board_upload.arduino.flash_extra_images =
+;board_build.partitions  = partitions/esp32_partition_app2944k_fs2M.csv
+; *** Serial port used for erasing/flashing the ESP32
+;upload_port             = COM4
+;monitor_port            = COM4
+;upload_speed            = 115200
+monitor_speed           = 115200
+upload_resetmethod      = ${common.upload_resetmethod}
+lib_ignore              =
+                          HTTPUpdateServer
+                          ESP RainMaker
+                          WiFiProv
+                          USB
+                          SPIFFS
+                          ESP32 Azure IoT Arduino
+                          ESP32 Async UDP
+                          ESP32 BLE Arduino
+;                          SimpleBLE
+                          NetBIOS
+                          ESP32
+                          Preferences
+                          BluetoothSerial
+; Disable next if you want to use ArduinoOTA in Tasmota32 (default disabled)
+                          ArduinoOTA
+
+lib_extra_dirs           = ${library.lib_extra_dirs}
+; *** ESP32 lib. ALWAYS needed for ESP32 !!!
+                          lib/libesp32
+; *** comment the following line if you dont use LVGL in a Tasmota32 build. Reduces compile time
+                          lib/libesp32_lvgl
+; *** comment the following line if you dont use ESP32 Audio in a Tasmota32 build. Reduces compile time
+                          lib/libesp32_audio
+; *** uncomment the following line if you use Bluetooth or Apple Homekit in a Tasmota32 build. Reduces compile time
+                          lib/libesp32_div
+; *** uncomment the following line if you use Epaper driver epidy in your Tasmota32 build. Reduces compile time
+;                          lib/libesp32_eink
+
+
+[library]
+shared_libdeps_dir      = lib
+; *** Library disable / enable for variant Tasmota(32). Disable reduces compile time
+; *** !!! Disabling needed libs will generate compile errors !!!
+; *** The resulting firmware will NOT be different if you leave all libs enabled
+; *** Disabling by putting a ";" in front of the lib name
+; *** If you dont know what it is all about, do not change
+lib_extra_dirs           =
+; *** Only disabled for Tasmota minimal and Tasmota light. For all other variants needed!
+                           lib/lib_basic
+; **** I2C devices. Most sensors. Disable only if you dont have ANY I2C device enabled
+                           lib/lib_i2c
+; *** Displays. Disable if you dont have any Display activated
+                           lib/lib_display
+; *** Bear SSL and base64. Disable if you dont have SSL or TLS activated
+                           lib/lib_ssl
+; *** Audio needs a lot of time to compile. Mostly not used functions. Recommended to disable
+                           lib/lib_audio
+; *** RF 433 stuff (not RF Bridge). Recommended to disable
+                           lib/lib_rf
+; *** Mostly not used functions. Recommended to disable
+                           lib/lib_div
+

ESP32-Sunton/user_config_override.h

@@ -0,0 +1,119 @@
+/*
+  user_config_override.h - user configuration overrides my_user_config.h for Tasmota
+
+  Copyright (C) 2021  Theo Arends
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _USER_CONFIG_OVERRIDE_H_
+#define _USER_CONFIG_OVERRIDE_H_
+
+/*****************************************************************************************************\
+ * USAGE:
+ *   To modify the stock configuration without changing the my_user_config.h file:
+ *   (1) copy this file to "user_config_override.h" (It will be ignored by Git)
+ *   (2) define your own settings below
+ *
+ ******************************************************************************************************
+ * ATTENTION:
+ *   - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER.
+ *   - Expect compiler warnings when no ifdef/undef/endif sequence is used.
+ *   - You still need to update my_user_config.h for major define USE_MQTT_TLS.
+ *   - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
+\*****************************************************************************************************/
+
+
+// -- Setup your own Wifi settings  ---------------
+#undef  STA_SSID1
+#define STA_SSID1         "Online.nl_1C91"             // [Ssid1] Wifi SSID
+
+#undef  STA_PASS1
+#define STA_PASS1         "8G87B4447B"     // [Password1] Wifi password
+
+// -- Setup your own MQTT settings  ---------------
+#undef  MQTT_HOST
+#define MQTT_HOST         "192.168.1.121" // [MqttHost]
+
+#undef  MQTT_PORT
+#define MQTT_PORT         1883                   // [MqttPort] MQTT port (10123 on CloudMQTT)
+
+
+
+#define USE_LVGL                                 // LVGL Engine, requires Berry (+382KB)
+  #define USE_LVGL_PSRAM                         // Allocate LVGL memory in PSRAM if PSRAM is connected - this might be slightly slower but leaves main memory intact
+  #define USE_LVGL_HASPMOTA                      // Enable OpenHASP compatiblity and Robotocondensed fonts (+90KB flash)
+  #define USE_LVGL_MAX_SLEEP  10                 // max sleep in ms when LVGL is enabled, more than 10ms will make display less responsive
+  #define USE_LVGL_PNG_DECODER                   // include a PNG image decoder from file system (+16KB)
+  #define USE_LVGL_TOUCHSCREEN                   // Use virtual touch screen with Berry driver
+  #define USE_LVGL_FREETYPE                      // Use the FreeType renderer to display fonts using native TTF files in file system (+77KB flash)
+    #define LV_USE_FT_CACHE_MANAGER 1            // define whether glyphs are cached by FreeType library
+    #define USE_LVGL_FREETYPE_MAX_FACES 64       // max number of FreeType faces in cache
+    #define USE_LVGL_FREETYPE_MAX_SIZES 4        // max number of sizes in cache
+    #define USE_LVGL_FREETYPE_MAX_BYTES 16*1024  // max bytes in cache
+    #define USE_LVGL_FREETYPE_MAX_BYTES_PSRAM 64*1024  // max bytes in cache when using PSRAM
+  #define USE_LVGL_BG_DEFAULT 0x000000           // Default color for the uninitialized background screen (black)
+
+
+#define USE_BERRY                                // Enable Berry scripting language
+
+  #define USE_INA219                             // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
+    #define INA219_SHUNT_RESISTOR (0.100)        // 0.1 Ohm default shunt resistor, can be overriden in user_config_override or using Sensor13
+  #define USE_INA226                             // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
+
+  #define USE_MCP230xx                           // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+5k1 code)
+    #define USE_MCP230xx_ADDR 0x20               // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x26 - set according to your wired setup)
+    #define USE_MCP230xx_OUTPUT                  // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+2k2 code)
+    #define USE_MCP230xx_DISPLAYOUTPUT           // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
+  #define USE_MCP23XXX_DRV                       // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
+  #define USE_PCA9685                            // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
+    #define USE_PCA9685_ADDR 0x40                // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
+    #define USE_PCA9685_FREQ 50                  // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
+  #define USE_PCA9632                            // [I2cDriver75] Enable PCA9632 I2C HW PWM Driver (+1k8 code)
+    #define USE_PCA9632_ADDR 0x60                // Define PCA9685 I2C Address to use (Must be within range 0x60 through 0x63 - set according to your wired setup)
+    #define USE_PCA9632_CM_0 0                   // Mapping for channel 0
+    #define USE_PCA9632_CM_1 1                   // Mapping for channel 1
+    #define USE_PCA9632_CM_2 2                   // Mapping for channel 2
+    #define USE_PCA9632_CM_3 3                   // Mapping for channel 3
+
+#define USE_PCF8574                            // [I2cDriver2] Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+2k1 code)
+    #define USE_PCF8574_MODE2                    // Enable Mode2 virtual relays/buttons/switches (+2k3 code)
+    #define USE_PCF8574_SENSOR                   // Enable Mode1 inputs and outputs in SENSOR message (+0k2 code)
+    #define USE_PCF8574_DISPLAYINPUT             // Enable Mode1 inputs display in Web page (+0k2 code)
+    #define USE_PCF8574_MQTTINPUT                // Enable Mode1 MQTT message & rule process on input change detection : stat/%topic%/PCF8574_INP = {"Time":"2021-03-07T16:19:23+01:00","PCF8574-1_INP":{"D1":1}} (+0k5 code)
+    #define PCF8574_ADDR1 0x20                   // First address to search for PCF8574
+    #define PCF8574_ADDR1_COUNT 7                // Number of addresses to search for PCF8574 - Default to 0x20 to 0x26
+    #define PCF8574_ADDR2 0x39                   // First address to search for PCF8574A
+    #define PCF8574_ADDR2_COUNT 6                // Number of addresses to search for PCF8574A - Default to 0x39 to 0x3E
+
+//  #define USE_DISPLAY                            // Add I2C/TM1637/MAX7219 Display Support (+2k code)
+//    #define USE_DISPLAY_TM1637                   // [DisplayModel 15] Enable TM1637 Module
+//    #define USE_DISPLAY_MAX7219                  // [DisplayModel 19] Enable MAX7219 Module
+
+// -- Universal Display Driver ---------------------------------
+// #define USE_UNIVERSAL_DISPLAY                   // New universal display driver for both I2C and SPI
+    #define MAX_TOUCH_BUTTONS 16                 // Virtual touch buttons
+
+// -- SPI sensors ---------------------------------
+#define USE_SPI                                  // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
+
+#ifdef USE_SPI
+  #define USE_DISPLAY                            // Add SPI Display support for 320x240 and 480x320 TFT
+    #define USE_DISPLAY_ILI9341                  // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
+    #define USE_DISPLAY_ST7789                   // [DisplayModel 12] Enable ST7789 module
+#endif  
+
+
+
+#endif  // _USER_CONFIG_OVERRIDE_H_