added WireViz and ESPHome

2026-09-09 08:09:30 +02:00
parent 046313eff5
commit b556e6a073
36 changed files with 7825 additions and 0 deletions
--- a/esphome/afzuiginglageweg.yaml
+++ b/esphome/afzuiginglageweg.yaml
@@ -0,0 +1,195 @@
+#' ==============================================================================
+#' ESP32-C3 SUPER MINI - CT RELAY CONTROLLER WITH OLED & ROTARY ENCODERS
+#' ==============================================================================
+#' UPDATED GPIO ASSIGNMENTS OVERVIEW:
+#' ------------------------------------------------------------------------------
+#' GPIO 0  : Rotary Encoder 1 - Phase A (Current Threshold)
+#' GPIO 1  : Rotary Encoder 1 - Phase B (Current Threshold)
+#' GPIO 2  : Rotary Encoder 1 - Push Button (Toggle Display On/Off)
+#' GPIO 3  : Rotary Encoder 2 - Phase A (Off-Delay)
+#' GPIO 4  : CT Current Sensor (Analog Input ADC1_CH4) [MOVED FROM GPIO7]
+#' GPIO 7  : Rotary Encoder 2 - Phase B (Off-Delay)     [MOVED FROM GPIO4]
+#' GPIO 5  : I2C - SCL (SH1106 Display)
+#' GPIO 6  : I2C - SDA (SH1106 Display)
+#' GPIO 8  : Relay Output (Active High)
+#' ==============================================================================
+
+esphome:
+  name: afzuiginglageweg
+
+esp32:
+  board: esp32-c3-devkitm-1
+  variant: esp32c3
+
+preferences:
+  flash_write_interval: 1min
+
+logger:
+
+api:
+
+ota:
+  - platform: esphome
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  
+  manual_ip:
+    static_ip: 192.168.1.173
+    gateway: 192.168.1.1
+    subnet: 255.255.255.0
+    dns1: 192.168.1.1
+
+  ap:
+    ssid: "CT-Relay Fallback AP"
+    password: !secret ap_password
+
+i2c:
+  sda: GPIO6
+  scl: GPIO5
+  scan: true
+
+font:
+  - file: "gfonts://Roboto"
+    id: font_main
+    size: 10
+
+globals:
+  - id: current_threshold
+    type: float
+    restore_value: true
+    initial_value: '0.5'
+
+  - id: off_delay_seconds
+    type: int
+    restore_value: true
+    initial_value: '5'
+
+  - id: display_timeout_timer
+    type: int
+    restore_value: false
+    initial_value: '0'
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO2
+      mode: INPUT_PULLUP
+    id: encoder_1_button
+    name: "Display Toggle Button"
+    on_press:
+      then:
+        - lambda: |-
+            id(display_timeout_timer) = 10;
+            id(main_display).turn_on();
+
+  - id: load_detected
+    platform: template
+    name: "Load Detected"
+    lambda: |-
+      return id(ct_current).state >= id(current_threshold);
+    on_state:
+      then:
+        - if:
+            condition:
+              binary_sensor.is_on: load_detected
+            then:
+              - switch.turn_on: relay_output
+              - script.stop: delay_off_script
+            else:
+              - script.execute: delay_off_script
+
+sensor:
+  # Current Transformer Reading on valid ADC Pin (GPIO4)
+  - platform: ct_clamp
+    sensor: adc_sensor
+    name: "CT Measured Current"
+    id: ct_current
+    update_interval: 500ms
+    sample_duration: 200ms
+    accuracy_decimals: 0
+    force_update:    true
+    filters:
+      - calibrate_linear:
+          - 0.01   -> 0
+          - 1     -> 1    
+
+  - platform: adc
+    pin: GPIO4
+    id: adc_sensor
+    attenuation: 12db   
+
+  # Rotary Encoder 1: Threshold Control
+  - platform: rotary_encoder
+    name: "Threshold Setting"
+    pin_a: GPIO0
+    pin_b: GPIO1
+    id: encoder_threshold
+    on_value:
+      then:
+        - lambda: |-
+            static int last_val = 0;
+            int diff = x - last_val;
+            last_val = x;
+            id(current_threshold) += (diff * 0.1);
+            if (id(current_threshold) < 0.0) id(current_threshold) = 0.0;
+            id(display_timeout_timer) = 10;
+            id(main_display).turn_on();
+
+  # Rotary Encoder 2: Delay Control
+  - platform: rotary_encoder
+    name: "Delay Setting"
+    pin_a: GPIO3
+    pin_b: GPIO7
+    id: encoder_delay
+    on_value:
+      then:
+        - lambda: |-
+            static int last_val = 0;
+            int diff = x - last_val;
+            last_val = x;
+            id(off_delay_seconds) += diff;
+            if (id(off_delay_seconds) < 0) id(off_delay_seconds) = 0;
+            id(display_timeout_timer) = 10;
+            id(main_display).turn_on();
+
+switch:
+  - platform: gpio
+    pin: GPIO8
+    inverted: true
+    name: "Relay Output"
+    id: relay_output
+
+script:
+  - id: delay_off_script
+    mode: restart
+    then:
+      - delay: !lambda "return id(off_delay_seconds) * 1000;"
+      - switch.turn_off: relay_output
+
+display:
+  - platform: ssd1306_i2c
+    model:   "SH1106 128x64"
+    address: 0x3C
+    id: main_display
+    update_interval: 0.1s
+    lambda: |-
+      it.printf(0, 0, id(font_main), "Current: %.2f A", id(ct_current).state);
+      it.printf(0, 11, id(font_main), "Threshold: %.1f A", id(current_threshold));
+      it.printf(0, 22, id(font_main), "Delay Set: %d s", id(off_delay_seconds));
+      it.printf(0, 33, id(font_main), "Relay State: %s", id(relay_output).state ? "ON" : "OFF");
+      it.printf(0, 44, id(font_main), "Delay: %d s", id(display_timeout_timer));
+      
+
+
+interval:
+  - interval: 1s
+    then:
+      - lambda: |-
+          if (id(display_timeout_timer) > 0) {
+            id(display_timeout_timer)--;
+            if (id(display_timeout_timer) == 0) {
+              id(main_display).turn_off();
+            }
+          }
--- a/esphome/x.html
+++ b/esphome/x.html
@@ -0,0 +1,371 @@
+# Configuration Parameters Reference
+
+Any information about this page goes here.
+
+| `logger` | `[]` |  |
+| `api` | `[]` |  |
+
+## `esphome`
+
+============================================================================== ESP32-C3 SUPER MINI - CT RELAY CONTROLLER WITH OLED & ROTARY ENCODERS ============================================================================== UPDATED GPIO ASSIGNMENTS OVERVIEW: ------------------------------------------------------------------------------ GPIO 0  : Rotary Encoder 1 - Phase A (Current Threshold) GPIO 1  : Rotary Encoder 1 - Phase B (Current Threshold) GPIO 2  : Rotary Encoder 1 - Push Button (Toggle Display On/Off) GPIO 3  : Rotary Encoder 2 - Phase A (Off-Delay) GPIO 4  : CT Current Sensor (Analog Input ADC1_CH4) [MOVED FROM GPIO7] GPIO 7  : Rotary Encoder 2 - Phase B (Off-Delay)     [MOVED FROM GPIO4] GPIO 5  : I2C - SCL (SH1106 Display) GPIO 6  : I2C - SDA (SH1106 Display) GPIO 8  : Relay Output (Active High) ==============================================================================
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `name` | `afzuiginglageweg` |  |
+
+## `esp32`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `board` | `esp32-c3-devkitm-1` |  |
+| `variant` | `esp32c3` |  |
+
+## `preferences`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `flash_write_interval` | `1min` |  |
+
+## `ota`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `esphome` |  |
+
+## `wifi`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `ssid` | `!secret wifi_ssid` |  |
+| `password` | `!secret wifi_password` |  |
+| `manual_ip` |  |  |
+| `ap` |  |  |
+
+### `manual_ip`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `static_ip` | `192.168.1.173` |  |
+| `gateway` | `192.168.1.1` |  |
+| `subnet` | `255.255.255.0` |  |
+| `dns1` | `192.168.1.1` |  |
+
+### `ap`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `ssid` | `"CT-Relay Fallback AP"` |  |
+| `password` | `!secret ap_password` |  |
+
+## `i2c`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `sda` | `GPIO6` |  |
+| `scl` | `GPIO5` |  |
+| `scan` | `true` |  |
+
+## `font`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `file` | `"gfonts://Roboto"` |  |
+| `id` | `font_main` |  |
+| `size` | `10` |  |
+
+## `globals`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `id` | `current_threshold` |  |
+| `type` | `float` |  |
+| `restore_value` | `true` |  |
+| `initial_value` | `'0.5'` |  |
+| `id` | `off_delay_seconds` |  |
+| `type` | `int` |  |
+| `restore_value` | `true` |  |
+| `initial_value` | `'5'` |  |
+| `id` | `display_timeout_timer` |  |
+| `type` | `int` |  |
+| `restore_value` | `false` |  |
+| `initial_value` | `'0'` |  |
+
+## `binary_sensor`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `gpio` |  |
+| `pin` |  |  |
+| `id` | `encoder_1_button` |  |
+| `name` | `"Display Toggle Button"` |  |
+| `on_press` |  |  |
+| `id` | `load_detected` |  |
+| `platform` | `template` |  |
+| `name` | `"Load Detected"` |  |
+| `lambda` | `|-` |  |
+| `return id(ct_current).state >= id(current_threshold);` |  |  |
+| `on_state` |  |  |
+
+### `pin`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `number` | `GPIO2` |  |
+| `mode` | `INPUT_PULLUP` |  |
+
+### `on_press`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+### `on_state`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `if` |  |  |
+
+##### `if`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `condition` |  |  |
+| `then` |  |  |
+| `else` |  |  |
+
+###### `condition`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `binary_sensor.is_on` | `load_detected` |  |
+
+###### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `switch.turn_on` | `relay_output` |  |
+| `script.stop` | `delay_off_script` |  |
+
+###### `else`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `script.execute` | `delay_off_script` |  |
+
+## `sensor`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `# Current Transformer Reading on valid ADC Pin (GPIO4)` |  |  |
+| `platform` | `ct_clamp` |  |
+| `sensor` | `adc_sensor` |  |
+| `name` | `"CT Measured Current"` |  |
+| `id` | `ct_current` |  |
+| `update_interval` | `500ms` |  |
+| `sample_duration` | `200ms` |  |
+| `accuracy_decimals` | `0` |  |
+| `force_update` | `true` |  |
+| `filters` |  |  |
+| `platform` | `adc` |  |
+| `pin` | `GPIO4` |  |
+| `id` | `adc_sensor` |  |
+| `attenuation` | `12db` |  |
+| `# Rotary Encoder 1` | `Threshold Control` |  |
+| `platform` | `rotary_encoder` |  |
+| `name` | `"Threshold Setting"` |  |
+| `pin_a` | `GPIO0` |  |
+| `pin_b` | `GPIO1` |  |
+| `id` | `encoder_threshold` |  |
+| `on_value` |  |  |
+| `# Rotary Encoder 2` | `Delay Control` |  |
+| `platform` | `rotary_encoder` |  |
+| `name` | `"Delay Setting"` |  |
+| `pin_a` | `GPIO3` |  |
+| `pin_b` | `GPIO7` |  |
+| `id` | `encoder_delay` |  |
+| `on_value` |  |  |
+
+### `filters`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `calibrate_linear` | `['0.01   -> 0', '1     -> 1']` |  |
+
+### `on_value`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `static int last_val = 0;` |  |  |
+| `int diff = x - last_val;` |  |  |
+| `last_val = x;` |  |  |
+| `id(current_threshold) += (diff * 0.1);` |  |  |
+| `if (id(current_threshold) < 0.0) id(current_threshold) = 0.0;` |  |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+### `on_value`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `static int last_val = 0;` |  |  |
+| `int diff = x - last_val;` |  |  |
+| `last_val = x;` |  |  |
+| `id(off_delay_seconds) += diff;` |  |  |
+| `if (id(off_delay_seconds) < 0) id(off_delay_seconds) = 0;` |  |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+## `switch`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `gpio` |  |
+| `pin` | `GPIO8` |  |
+| `inverted` | `true` |  |
+| `name` | `"Relay Output"` |  |
+| `id` | `relay_output` |  |
+
+## `script`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `id` | `delay_off_script` |  |
+| `mode` | `restart` |  |
+| `then` |  |  |
+
+### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `delay` | `!lambda "return id(off_delay_seconds) * 1000;"` |  |
+| `switch.turn_off` | `relay_output` |  |
+
+## `display`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `ssd1306_i2c` |  |
+| `model` | `"SH1106 128x64"` |  |
+| `address` | `0x3C` |  |
+| `id` | `main_display` |  |
+| `update_interval` | `0.1s` |  |
+| `lambda` | `|-` |  |
+| `it.printf(0, 0, id(font_main), "Current` | `%.2f A", id(ct_current).state);` |  |
+| `it.printf(0, 11, id(font_main), "Threshold` | `%.1f A", id(current_threshold));` |  |
+| `it.printf(0, 22, id(font_main), "Delay Set` | `%d s", id(off_delay_seconds));` |  |
+| `it.printf(0, 33, id(font_main), "Relay State` | `%s", id(relay_output).state ? "ON" : "OFF");` |  |
+| `it.printf(0, 44, id(font_main), "Delay` | `%d s", id(display_timeout_timer));` |  |
+
+## `interval`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `interval` | `1s` |  |
+| `then` |  |  |
+
+### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `if (id(display_timeout_timer) > 0) {` |  |  |
+| `id(display_timeout_timer)--;` |  |  |
+| `if (id(display_timeout_timer) == 0) {` |  |  |
+| `id(main_display).turn_off();` |  |  |
+| `}` |  |  |
+| `}` |  |  |
+
+---
+Generated by [yamldoc](https://github.com/chris1221/yaml.doc) v0.4.1 on 2026-09-07
--- a/esphome/x.md
+++ b/esphome/x.md
@@ -0,0 +1,371 @@
+# Configuration Parameters Reference
+
+Any information about this page goes here.
+
+| `logger` | `[]` |  |
+| `api` | `[]` |  |
+
+## `esphome`
+
+============================================================================== ESP32-C3 SUPER MINI - CT RELAY CONTROLLER WITH OLED & ROTARY ENCODERS ============================================================================== UPDATED GPIO ASSIGNMENTS OVERVIEW: ------------------------------------------------------------------------------ GPIO 0  : Rotary Encoder 1 - Phase A (Current Threshold) GPIO 1  : Rotary Encoder 1 - Phase B (Current Threshold) GPIO 2  : Rotary Encoder 1 - Push Button (Toggle Display On/Off) GPIO 3  : Rotary Encoder 2 - Phase A (Off-Delay) GPIO 4  : CT Current Sensor (Analog Input ADC1_CH4) [MOVED FROM GPIO7] GPIO 7  : Rotary Encoder 2 - Phase B (Off-Delay)     [MOVED FROM GPIO4] GPIO 5  : I2C - SCL (SH1106 Display) GPIO 6  : I2C - SDA (SH1106 Display) GPIO 8  : Relay Output (Active High) ==============================================================================
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `name` | `afzuiginglageweg` |  |
+
+## `esp32`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `board` | `esp32-c3-devkitm-1` |  |
+| `variant` | `esp32c3` |  |
+
+## `preferences`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `flash_write_interval` | `1min` |  |
+
+## `ota`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `esphome` |  |
+
+## `wifi`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `ssid` | `!secret wifi_ssid` |  |
+| `password` | `!secret wifi_password` |  |
+| `manual_ip` |  |  |
+| `ap` |  |  |
+
+### `manual_ip`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `static_ip` | `192.168.1.173` |  |
+| `gateway` | `192.168.1.1` |  |
+| `subnet` | `255.255.255.0` |  |
+| `dns1` | `192.168.1.1` |  |
+
+### `ap`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `ssid` | `"CT-Relay Fallback AP"` |  |
+| `password` | `!secret ap_password` |  |
+
+## `i2c`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `sda` | `GPIO6` |  |
+| `scl` | `GPIO5` |  |
+| `scan` | `true` |  |
+
+## `font`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `file` | `"gfonts://Roboto"` |  |
+| `id` | `font_main` |  |
+| `size` | `10` |  |
+
+## `globals`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `id` | `current_threshold` |  |
+| `type` | `float` |  |
+| `restore_value` | `true` |  |
+| `initial_value` | `'0.5'` |  |
+| `id` | `off_delay_seconds` |  |
+| `type` | `int` |  |
+| `restore_value` | `true` |  |
+| `initial_value` | `'5'` |  |
+| `id` | `display_timeout_timer` |  |
+| `type` | `int` |  |
+| `restore_value` | `false` |  |
+| `initial_value` | `'0'` |  |
+
+## `binary_sensor`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `gpio` |  |
+| `pin` |  |  |
+| `id` | `encoder_1_button` |  |
+| `name` | `"Display Toggle Button"` |  |
+| `on_press` |  |  |
+| `id` | `load_detected` |  |
+| `platform` | `template` |  |
+| `name` | `"Load Detected"` |  |
+| `lambda` | `|-` |  |
+| `return id(ct_current).state >= id(current_threshold);` |  |  |
+| `on_state` |  |  |
+
+### `pin`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `number` | `GPIO2` |  |
+| `mode` | `INPUT_PULLUP` |  |
+
+### `on_press`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+### `on_state`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `if` |  |  |
+
+##### `if`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `condition` |  |  |
+| `then` |  |  |
+| `else` |  |  |
+
+###### `condition`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `binary_sensor.is_on` | `load_detected` |  |
+
+###### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `switch.turn_on` | `relay_output` |  |
+| `script.stop` | `delay_off_script` |  |
+
+###### `else`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `script.execute` | `delay_off_script` |  |
+
+## `sensor`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `# Current Transformer Reading on valid ADC Pin (GPIO4)` |  |  |
+| `platform` | `ct_clamp` |  |
+| `sensor` | `adc_sensor` |  |
+| `name` | `"CT Measured Current"` |  |
+| `id` | `ct_current` |  |
+| `update_interval` | `500ms` |  |
+| `sample_duration` | `200ms` |  |
+| `accuracy_decimals` | `0` |  |
+| `force_update` | `true` |  |
+| `filters` |  |  |
+| `platform` | `adc` |  |
+| `pin` | `GPIO4` |  |
+| `id` | `adc_sensor` |  |
+| `attenuation` | `12db` |  |
+| `# Rotary Encoder 1` | `Threshold Control` |  |
+| `platform` | `rotary_encoder` |  |
+| `name` | `"Threshold Setting"` |  |
+| `pin_a` | `GPIO0` |  |
+| `pin_b` | `GPIO1` |  |
+| `id` | `encoder_threshold` |  |
+| `on_value` |  |  |
+| `# Rotary Encoder 2` | `Delay Control` |  |
+| `platform` | `rotary_encoder` |  |
+| `name` | `"Delay Setting"` |  |
+| `pin_a` | `GPIO3` |  |
+| `pin_b` | `GPIO7` |  |
+| `id` | `encoder_delay` |  |
+| `on_value` |  |  |
+
+### `filters`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `calibrate_linear` | `['0.01   -> 0', '1     -> 1']` |  |
+
+### `on_value`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `static int last_val = 0;` |  |  |
+| `int diff = x - last_val;` |  |  |
+| `last_val = x;` |  |  |
+| `id(current_threshold) += (diff * 0.1);` |  |  |
+| `if (id(current_threshold) < 0.0) id(current_threshold) = 0.0;` |  |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+### `on_value`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `then` |  |  |
+
+#### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `static int last_val = 0;` |  |  |
+| `int diff = x - last_val;` |  |  |
+| `last_val = x;` |  |  |
+| `id(off_delay_seconds) += diff;` |  |  |
+| `if (id(off_delay_seconds) < 0) id(off_delay_seconds) = 0;` |  |  |
+| `id(display_timeout_timer) = 10;` |  |  |
+| `id(main_display).turn_on();` |  |  |
+
+## `switch`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `gpio` |  |
+| `pin` | `GPIO8` |  |
+| `inverted` | `true` |  |
+| `name` | `"Relay Output"` |  |
+| `id` | `relay_output` |  |
+
+## `script`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `id` | `delay_off_script` |  |
+| `mode` | `restart` |  |
+| `then` |  |  |
+
+### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `delay` | `!lambda "return id(off_delay_seconds) * 1000;"` |  |
+| `switch.turn_off` | `relay_output` |  |
+
+## `display`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `platform` | `ssd1306_i2c` |  |
+| `model` | `"SH1106 128x64"` |  |
+| `address` | `0x3C` |  |
+| `id` | `main_display` |  |
+| `update_interval` | `0.1s` |  |
+| `lambda` | `|-` |  |
+| `it.printf(0, 0, id(font_main), "Current` | `%.2f A", id(ct_current).state);` |  |
+| `it.printf(0, 11, id(font_main), "Threshold` | `%.1f A", id(current_threshold));` |  |
+| `it.printf(0, 22, id(font_main), "Delay Set` | `%d s", id(off_delay_seconds));` |  |
+| `it.printf(0, 33, id(font_main), "Relay State` | `%s", id(relay_output).state ? "ON" : "OFF");` |  |
+| `it.printf(0, 44, id(font_main), "Delay` | `%d s", id(display_timeout_timer));` |  |
+
+## `interval`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `interval` | `1s` |  |
+| `then` |  |  |
+
+### `then`
+
+**Member variables:**
+
+| Key | Value | Information |
+| :-: | :-: | :-- |
+| `lambda` | `|-` |  |
+| `if (id(display_timeout_timer) > 0) {` |  |  |
+| `id(display_timeout_timer)--;` |  |  |
+| `if (id(display_timeout_timer) == 0) {` |  |  |
+| `id(main_display).turn_off();` |  |  |
+| `}` |  |  |
+| `}` |  |  |
+
+---
+Generated by [yamldoc](https://github.com/chris1221/yaml.doc) v0.4.1 on 2026-09-07