# Configuration Parameters Reference

Any information about this page goes here.

| `logger` | `[]` |  |
| `api` | `[]` |  |

## `esphome`

============================================================================== ESP32-C3 SUPER MINI - CT RELAY CONTROLLER WITH OLED & ROTARY ENCODERS ============================================================================== UPDATED GPIO ASSIGNMENTS OVERVIEW: ------------------------------------------------------------------------------ GPIO 0  : Rotary Encoder 1 - Phase A (Current Threshold) GPIO 1  : Rotary Encoder 1 - Phase B (Current Threshold) GPIO 2  : Rotary Encoder 1 - Push Button (Toggle Display On/Off) GPIO 3  : Rotary Encoder 2 - Phase A (Off-Delay) GPIO 4  : CT Current Sensor (Analog Input ADC1_CH4) [MOVED FROM GPIO7] GPIO 7  : Rotary Encoder 2 - Phase B (Off-Delay)     [MOVED FROM GPIO4] GPIO 5  : I2C - SCL (SH1106 Display) GPIO 6  : I2C - SDA (SH1106 Display) GPIO 8  : Relay Output (Active High) ==============================================================================

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `name` | `afzuiginglageweg` |  |

## `esp32`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `board` | `esp32-c3-devkitm-1` |  |
| `variant` | `esp32c3` |  |

## `preferences`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `flash_write_interval` | `1min` |  |

## `ota`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `platform` | `esphome` |  |

## `wifi`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `ssid` | `!secret wifi_ssid` |  |
| `password` | `!secret wifi_password` |  |
| `manual_ip` |  |  |
| `ap` |  |  |

### `manual_ip`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `static_ip` | `192.168.1.173` |  |
| `gateway` | `192.168.1.1` |  |
| `subnet` | `255.255.255.0` |  |
| `dns1` | `192.168.1.1` |  |

### `ap`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `ssid` | `"CT-Relay Fallback AP"` |  |
| `password` | `!secret ap_password` |  |

## `i2c`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `sda` | `GPIO6` |  |
| `scl` | `GPIO5` |  |
| `scan` | `true` |  |

## `font`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `file` | `"gfonts://Roboto"` |  |
| `id` | `font_main` |  |
| `size` | `10` |  |

## `globals`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `id` | `current_threshold` |  |
| `type` | `float` |  |
| `restore_value` | `true` |  |
| `initial_value` | `'0.5'` |  |
| `id` | `off_delay_seconds` |  |
| `type` | `int` |  |
| `restore_value` | `true` |  |
| `initial_value` | `'5'` |  |
| `id` | `display_timeout_timer` |  |
| `type` | `int` |  |
| `restore_value` | `false` |  |
| `initial_value` | `'0'` |  |

## `binary_sensor`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `platform` | `gpio` |  |
| `pin` |  |  |
| `id` | `encoder_1_button` |  |
| `name` | `"Display Toggle Button"` |  |
| `on_press` |  |  |
| `id` | `load_detected` |  |
| `platform` | `template` |  |
| `name` | `"Load Detected"` |  |
| `lambda` | `|-` |  |
| `return id(ct_current).state >= id(current_threshold);` |  |  |
| `on_state` |  |  |

### `pin`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `number` | `GPIO2` |  |
| `mode` | `INPUT_PULLUP` |  |

### `on_press`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `then` |  |  |

#### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `lambda` | `|-` |  |
| `id(display_timeout_timer) = 10;` |  |  |
| `id(main_display).turn_on();` |  |  |

### `on_state`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `then` |  |  |

#### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `if` |  |  |

##### `if`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `condition` |  |  |
| `then` |  |  |
| `else` |  |  |

###### `condition`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `binary_sensor.is_on` | `load_detected` |  |

###### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `switch.turn_on` | `relay_output` |  |
| `script.stop` | `delay_off_script` |  |

###### `else`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `script.execute` | `delay_off_script` |  |

## `sensor`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `# Current Transformer Reading on valid ADC Pin (GPIO4)` |  |  |
| `platform` | `ct_clamp` |  |
| `sensor` | `adc_sensor` |  |
| `name` | `"CT Measured Current"` |  |
| `id` | `ct_current` |  |
| `update_interval` | `500ms` |  |
| `sample_duration` | `200ms` |  |
| `accuracy_decimals` | `0` |  |
| `force_update` | `true` |  |
| `filters` |  |  |
| `platform` | `adc` |  |
| `pin` | `GPIO4` |  |
| `id` | `adc_sensor` |  |
| `attenuation` | `12db` |  |
| `# Rotary Encoder 1` | `Threshold Control` |  |
| `platform` | `rotary_encoder` |  |
| `name` | `"Threshold Setting"` |  |
| `pin_a` | `GPIO0` |  |
| `pin_b` | `GPIO1` |  |
| `id` | `encoder_threshold` |  |
| `on_value` |  |  |
| `# Rotary Encoder 2` | `Delay Control` |  |
| `platform` | `rotary_encoder` |  |
| `name` | `"Delay Setting"` |  |
| `pin_a` | `GPIO3` |  |
| `pin_b` | `GPIO7` |  |
| `id` | `encoder_delay` |  |
| `on_value` |  |  |

### `filters`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `calibrate_linear` | `['0.01   -> 0', '1     -> 1']` |  |

### `on_value`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `then` |  |  |

#### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `lambda` | `|-` |  |
| `static int last_val = 0;` |  |  |
| `int diff = x - last_val;` |  |  |
| `last_val = x;` |  |  |
| `id(current_threshold) += (diff * 0.1);` |  |  |
| `if (id(current_threshold) < 0.0) id(current_threshold) = 0.0;` |  |  |
| `id(display_timeout_timer) = 10;` |  |  |
| `id(main_display).turn_on();` |  |  |

### `on_value`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `then` |  |  |

#### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `lambda` | `|-` |  |
| `static int last_val = 0;` |  |  |
| `int diff = x - last_val;` |  |  |
| `last_val = x;` |  |  |
| `id(off_delay_seconds) += diff;` |  |  |
| `if (id(off_delay_seconds) < 0) id(off_delay_seconds) = 0;` |  |  |
| `id(display_timeout_timer) = 10;` |  |  |
| `id(main_display).turn_on();` |  |  |

## `switch`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `platform` | `gpio` |  |
| `pin` | `GPIO8` |  |
| `inverted` | `true` |  |
| `name` | `"Relay Output"` |  |
| `id` | `relay_output` |  |

## `script`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `id` | `delay_off_script` |  |
| `mode` | `restart` |  |
| `then` |  |  |

### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `delay` | `!lambda "return id(off_delay_seconds) * 1000;"` |  |
| `switch.turn_off` | `relay_output` |  |

## `display`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `platform` | `ssd1306_i2c` |  |
| `model` | `"SH1106 128x64"` |  |
| `address` | `0x3C` |  |
| `id` | `main_display` |  |
| `update_interval` | `0.1s` |  |
| `lambda` | `|-` |  |
| `it.printf(0, 0, id(font_main), "Current` | `%.2f A", id(ct_current).state);` |  |
| `it.printf(0, 11, id(font_main), "Threshold` | `%.1f A", id(current_threshold));` |  |
| `it.printf(0, 22, id(font_main), "Delay Set` | `%d s", id(off_delay_seconds));` |  |
| `it.printf(0, 33, id(font_main), "Relay State` | `%s", id(relay_output).state ? "ON" : "OFF");` |  |
| `it.printf(0, 44, id(font_main), "Delay` | `%d s", id(display_timeout_timer));` |  |

## `interval`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `interval` | `1s` |  |
| `then` |  |  |

### `then`

**Member variables:**

| Key | Value | Information |
| :-: | :-: | :-- |
| `lambda` | `|-` |  |
| `if (id(display_timeout_timer) > 0) {` |  |  |
| `id(display_timeout_timer)--;` |  |  |
| `if (id(display_timeout_timer) == 0) {` |  |  |
| `id(main_display).turn_off();` |  |  |
| `}` |  |  |
| `}` |  |  |

---
Generated by [yamldoc](https://github.com/chris1221/yaml.doc) v0.4.1 on 2026-09-07